Moto G Power (2021) - codename "guamna"

Installing the GSI

NOTE: this will remove all your data! Make sure you do not set a pin on your device before flashing any of the GSI files! This will make it impossible to pass the initial device setup. Your Mileage May Vary! I am not responsible for anything that happens when you follow these steps.

• Unlock your bootloader (there are many tutorials on how to do this)
• Go into fastbootd (adb reboot fastboot, or from recovery fastboot reboot fastboot)
• Download vbmeta.img from Google: https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img
• Flash vbmeta.img (fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
• Then flash your system.img (fastboot flash system <your downloaded system img>.img)
• Use the volume and power buttons on your phone to navigate to the "Enter system recovery" (or something similar) section
• Navigate to "erase all data (factory reset)" (or something similar) and confirm
• Navigate to "reboot to system" (or something similar
• This should now boot you into a working GSI :)

Fixing common issues

Read the Common Issues section of the wiki to fix common issues like bluetooth, fingerprint reader not working, wired headphones not working

Features I have not tested

• Sim card (mobile data, calling)

Further Info

• Tested by @franciskafieh on Aug. 5th, 2022
• Tested both secure-gapps and normal gapps variants (AOSP 12.1 v414)
• Tested on XT2093-4