Introduction - parmsco/Line-Following-Robot GitHub Wiki

Mech 202 is an engineering design class in which the class was divided into groups of 4 and tasked to create a device that could participate in a battle-bots style competition at the end of the semester. The main constraints placed on the design of the device were size, the devices could not exceed 5 inches by 6 inches and weight, the devices could not exceed 3 lbs. The robots would start at opposite ends of a figure eight track and the robot that could travel the farthest distance in 3 minutes was the winner. Group 007, also known as the Bow Tie Boys, created the robot seen in the picture above. Throughout an entire semester, group 007 built and tested the above robot, which would carry them to success.