Setting up Wi Fi - openmiko/openmiko GitHub Wiki
Wi-Fi configuration is done via the sdcard.
On the sdcard create the directories /config/overlay/etc
:
In the etc
directory copy the file wpa_supplicant.conf
. Edit this file and plug in your Wi-Fi SSID name and password.
Insert the sdcard into the camera and reboot. OpenMiko will copy this directory over to the /config
partition (which is persistent flash storage)*.
WyzeCam Pan or Dafang cameras need a different Wi-Fi module configured rather than the stock Wi-Fi module. If this change is not made, your camera won't connect to Wi-Fi. This change is made using the openmiko.conf
config file that resides in /config/overlay/etc
.
Per above, you should have already created the /config/overlay/etc
directory when creating the wpa_supplicant.conf
file to configure Wi-Fi. Create another file in the same place named openmiko.conf
. Copy the minimal config from https://github.com/openmiko/openmiko/blob/master/overlay_minimal/etc/openmiko.conf and change the line that says WIFI_MODULE=8189fs
to WIFI_MODULE=8189es
.
*This process of editing overlays can also be used to overwrite other files. For example:
-
/etc/passwd
and/etc/shadow
can be overwritten to make sure password changes are persistent -
/config/overlay/etc/dropbear/dropbear_ecdsa_host_key
can be used to have a persistent SSH signature