Verify system mount points state parameters including name, size, utilized, and available space.

• dut.testbed

• No special setup required. Ensure the DUT is operational.

1. Subscribe/Get /system/mount-points/mount-point list.
2. Verify that the list of mount points is not empty (expecting at least one mount point).
3. For each mount point, verify name, size, utilized, and available are present and valid:
   • size >= 0
   • utilized <= size
   • available <= size

Note: mount-points in OpenConfig are config false (operational state only), so we cannot configure them via OC. We verify the state reported by the system.

{
  "system": {
    "mount-points": {
      "mount-point": [
        {
          "name": "/",
          "state": {
            "name": "/",
            "size": "100000",
            "utilized": "50000",
            "available": "50000"
          }
        }
      ]
    }
  }
}

paths:
  /system/mount-points/mount-point/state/available:
  /system/mount-points/mount-point/state/name:
  /system/mount-points/mount-point/state/size:
  /system/mount-points/mount-point/state/utilized:

rpcs:
  gnmi:
    gNMI.Subscribe:
    gNMI.Get:

• FFF