mpls_gre_udp_decap_test - openconfig/featureprofiles GitHub Wiki
Create a policy-forwarding configuration using gNMI to decapsulate MPLS in GRE and UDP packets which are sent to a IP from a decap pool or loopback address and apply to the DUT.
TODO: Complete test environment setup steps
inner_ipv6_dst_A = "2001:aa:bb::1/128" inner_ipv6_dst_B = "2001:aa:bb::2/128" inner_ipv6_default = "::/0"
ipv4_inner_dst_A = "10.5.1.1/32" ipv4_inner_dst_B = "10.5.1.2/32" ipv4_inner_default = "0.0.0.0/0"
outer_ipv6_src = "2001:f:a:1::0" outer_ipv6_dst_A = "2001:f:c:e::1" outer_ipv6_dst_B = "2001:f:c:e::2" outer_ipv6_dst_def = "2001:1:1:1::0" outer_dst_udp_port = "6635" outer_dscp = "26" outer_ip-ttl = "64"
Canonical OpenConfig for policy forwarding, matching IP prefix with action decapsulate in GRE.
{
"openconfig-network-instance": {
"network-instances": [
{
"afts": {
"policy-forwarding": {
"policies": [
{
"config": {
"policy-id": "default decap rule",
"type": "PBR_POLICY"
},
"policy": "default decap rule",
"rules": [
{
"config": {
"sequence-id": 1,
},
"ipv6": {
"config": {
"destination-address": "decap_ipv6"
}
},
"action": {
"decapsulate-mpls-in-gre": TRUE
}
}
]
}
]
}
}
}
]
}
}- Push the gNMI the policy forwarding configuration
- Push the configuration to DUT using gnmi.Set with REPLACE option
- Configure ATE port 1 with traffic flow
- Flow should have a packet encap format : outer_decap_gre_ipv6 <- MPLS label <- inner_decap_ipv6
- Generate traffic from ATE port 1
- Validate ATE port 2 receives the innermost IPv4 traffic with correct VLAN and inner_decap_ipv6
Canonical OpenConfig for policy forwarding, matching IP prefix with action decapsulate MPLS in UDP.
{
"openconfig-network-instance": {
"network-instances": [
{
"afts": {
"policy-forwarding": {
"policies": [
{
"config": {
"policy-id": "default decap rule",
"type": "PBR_POLICY"
},
"policy": "default decap rule",
"rules": [
{
"config": {
"sequence-id": 1,
},
"ipv6": {
"config": {
"destination-address": "decap_ipv6"
}
},
"action": {
"decapsulate-mpls-in-udp": TRUE
}
}
]
}
]
}
}
}
]
}
}- Push the gNMI the policy forwarding configuration
- Push the configuration to DUT using gnmi.Set with REPLACE option
- Configure ATE port 1 with traffic flow
- Flow should have a packet encap format : outer_decap_udp_ipv6 <- MPLS label <- inner_decap_ipv6
- Generate traffic from ATE port 1
- Validate ATE port 2 receives the innermost IPv4 traffic with correct VLAN and inner_decap_ipv6
paths:
# Paths added for PF-1.7.1 - MPLS in GRE decapsulation set by gNMI
/network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/ipv6/config/destination-address:
# TODO: /network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/action/config/decapsulate-mpls-in-gre:
# Paths added for PF-1.7.2 - MPLS in UDP decapsulation set by gNMI
/network-instances/network-instance/policy-forwarding/policies/policy/rules/rule/action/config/decapsulate-mpls-in-udp:
rpcs:
gnmi:
gNMI.Set:
union_replace: true
replace: true
gNMI.Subscribe:
on_change: true
- FFF