large_ip_packet_transmission - openconfig/featureprofiles GitHub Wiki

MTU-1.3: Large IP Packet Transmission

Summary

Test that ports with sufficiently high MTU do not fragment any packets when flows of various size IPv4 and IPv6 packet sizes are sent over them.

Procedure

  • Test environment setup

    • Configure DUT with routed input and output interfaces with an Ethernet MTU of 9216.
    • Test should be executed with two different interface/connectivity profiles:
      1. Standalone -- one input and one output port
      2. Bundle with four input members and four output members

  • MTU-1.3.1: Test with Physical and Bundle interfaces

    • Run traffic flows of the following size over IPv4 and IPv6 between ATE ports.
      • 1500 Bytes
      • 2000 Bytes
      • 4000 Bytes
      • 9202 Bytes
    • Assert ATE reports packets sent and received count are the same, indicating no fragmentation, and successful transit.

OpenConfig Path and RPC Coverage

The below yaml defines the OC paths intended to be covered by this test. OC paths used for test setup are not listed here.

paths:
  # Config Paths
  /interfaces/interface/config/mtu:
  /interfaces/interface/subinterfaces/subinterface/ipv4/config/mtu:
  /interfaces/interface/subinterfaces/subinterface/ipv6/config/mtu:
  # State Paths
  /interfaces/interface/state/counters/in-pkts:
  /interfaces/interface/state/counters/in-octets:
  /interfaces/interface/state/counters/out-pkts:
  /interfaces/interface/state/counters/out-octets:
  /interfaces/interface/state/counters/in-errors:
  /interfaces/interface/state/counters/in-unicast-pkts:
  /interfaces/interface/state/counters/in-discards:
  /interfaces/interface/state/counters/out-errors:
  /interfaces/interface/state/counters/out-unicast-pkts:
  /interfaces/interface/state/counters/out-discards:

rpcs:
  gnmi:
    gNMI.Set:

Minimum DUT platform requirement

N/A

⚠️ **GitHub.com Fallback** ⚠️