This test validates that the DUT can suppress the advertisement of IP reachability (TLV 135 for IPv4 and TLV 236 for IPv6) within IS-IS LSPs.

The test validates:

• Suppression mode at global address-family level (NONE, ALL, NON_PASSIVE, NON_PASSIVE_POINT_TO_POINT).
• Verification that suppression configuration and telemetry state match.
• Verification via ATE that advertised LSPs correctly include or omit the expected prefix reachability TLVs.
• Ensuring IS-IS adjacencies remain fully established across all valid interfaces during suppression changes.

• featureprofiles/topologies/atedut_2.testbed

flowchart LR
    subgraph ATE
        ATE-Port1["ATE Port 1\n(192.0.2.2/30\n2001:db8::2/126)"]
        ATE-Port2["ATE Port 2\n(198.51.100.2/30\n2001:db8:1::2/126)"]
    end
    subgraph DUT
        DUT-Port1["DUT Port 1\n(192.0.2.1/30\n2001:db8::1/126)"]
        DUT-Port2["DUT Port 2\n(198.51.100.1/30\n2001:db8:1::1/126)"]
        DUT-Loopback0["DUT Loopback0\n(203.0.113.1/32\n2001:db8:2::1/128)\n[Passive]"]
    end
    ATE-Port1 <-->|P2P IS-IS Adjacency| DUT-Port1
    ATE-Port2 <-->|LAN/Broadcast IS-IS Adjacency| DUT-Port2

• DUT:
  • Network Entity Title (NET): 49.0001.1920.0000.2001.00
  • Port 1: 192.0.2.1/30, 2001:db8::1/126 (Point-to-Point, non-passive)
  • Port 2: 198.51.100.1/30, 2001:db8:1::1/126 (Broadcast/LAN, non-passive)
  • Loopback0: 203.0.113.1/32, 2001:db8:2::1/128 (Passive)
• ATE:
  • Port 1: 192.0.2.2/30, 2001:db8::2/126, NET 49.0001.1920.0000.2002.00
  • Port 2: 198.51.100.2/30, 2001:db8:1::2/126, NET 49.0001.1920.0000.2003.00
• IS-IS Parameters:
  • Level Capability: Level 2
  • Metric Style: Wide
  • Address Families: IPv4 Unicast (IPV4), IPv6 Unicast (IPV6)

1. Configure DUT and ATE interfaces as defined in the topology.
2. Enable IS-IS Level 2 globally on the DUT with NET 49.0001.1920.0000.2001.00, wide metric, and address families IPV4 and IPV6.
3. Verify via telemetry that global NET is correctly configured and active in state (/network-instances/network-instance/protocols/protocol/isis/global/state/net).
4. Establish IS-IS Level 2 adjacencies on Port 1 and Port 2.
5. Verify via telemetry that adjacencies on Port 1 and Port 2 reach UP state.

• Goal: Validate that in default mode (NONE), the DUT advertises IP reachability TLVs for all active and passive interfaces.
• Procedure:
  1. Configure global suppress-interface-reachability to NONE for IPv4 and IPv6 address families on the DUT.
  2. Verify via telemetry that global suppress-interface-reachability is NONE for IPv4 and IPv6.
  3. Inspect DUT's advertised LSPs on ATE:
     • Verify Extended IPv4 Reachability (TLV 135) and IPv6 Reachability (TLV 236) are present for Port 1, Port 2, and Loopback0.
  4. Verify IS-IS adjacencies on Port 1 and Port 2 remain in UP state.

• Goal: Validate that when suppression mode is set to ALL, the DUT omits prefix reachability TLVs for all interfaces while maintaining IS-IS adjacencies.
• Procedure:
  1. Configure global suppress-interface-reachability to ALL for IPv4 and IPv6 on the DUT.
  2. Verify via telemetry that global suppress-interface-reachability is ALL for IPv4 and IPv6.
  3. Inspect DUT's advertised LSPs received on ATE:
     • Verify TLV 135 (IPv4) and TLV 236 (IPv6) are omitted for Port 1, Port 2, and Loopback0.
  4. Verify IS-IS adjacencies on Port 1 and Port 2 remain continuously UP.

• Goal: Validate that setting suppression mode to NON_PASSIVE suppresses active transit interfaces while continuing to advertise passive interfaces.
• Procedure:
  1. Configure global suppress-interface-reachability to NON_PASSIVE for IPv4 and IPv6 on the DUT.
  2. Verify via telemetry that global suppress-interface-reachability is NON_PASSIVE for IPv4 and IPv6.
  3. Inspect DUT's advertised LSPs received on ATE:
     • Verify TLV 135 (IPv4) and TLV 236 (IPv6) are present only for passive interface Loopback0.
     • Verify TLV 135 and TLV 236 are omitted for non-passive Port 1 and Port 2.
  4. Verify IS-IS adjacencies on Port 1 and Port 2 remain in UP state.

• Goal: Validate that setting suppression mode to NON_PASSIVE_POINT_TO_POINT suppresses only point-to-point active interfaces while preserving reachability for broadcast and passive interfaces.
• Procedure:
  1. Configure global suppress-interface-reachability to NON_PASSIVE_POINT_TO_POINT for IPv4 and IPv6 on the DUT.
  2. Verify via telemetry that global suppress-interface-reachability is NON_PASSIVE_POINT_TO_POINT for IPv4 and IPv6.
  3. Inspect DUT's advertised LSPs received on ATE:
     • Verify TLV 135 (IPv4) and TLV 236 (IPv6) are present for Loopback0 and Port 2 (Broadcast).
     • Verify TLV 135 and TLV 236 are omitted for Port 1 (Point-to-Point).
  4. Verify IS-IS adjacencies on Port 1 and Port 2 remain in UP state.
  5. Register a cleanup action (e.g., using t.Cleanup()) to restore the DUT configuration to default (suppress-interface-reachability: NONE) to leave the testbed in a clean state.

{
  "openconfig-network-instance:network-instances": {
    "network-instance": [
      {
        "config": {
          "name": "DEFAULT"
        },
        "name": "DEFAULT",
        "protocols": {
          "protocol": [
            {
              "config": {
                "identifier": "openconfig-policy-types:ISIS",
                "name": "DEFAULT"
              },
              "identifier": "openconfig-policy-types:ISIS",
              "isis": {
                "global": {
                  "afi-safi": {
                    "af": [
                      {
                        "afi-name": "openconfig-isis-types:IPV4",
                        "config": {
                          "afi-name": "openconfig-isis-types:IPV4",
                          "enabled": true,
                          "safi-name": "openconfig-isis-types:UNICAST"
                        },
                        "safi-name": "openconfig-isis-types:UNICAST"
                      },
                      {
                        "afi-name": "openconfig-isis-types:IPV6",
                        "config": {
                          "afi-name": "openconfig-isis-types:IPV6",
                          "enabled": true,
                          "safi-name": "openconfig-isis-types:UNICAST"
                        },
                        "safi-name": "openconfig-isis-types:UNICAST"
                      }
                    ]
                  },
                  "config": {
                    "net": [
                      "49.0001.1920.0000.2001.00"
                    ]
                  }
                }
              }
            }
          ]
        }
      }
    ]
  }
}

The below yaml defines the OC paths intended to be covered by this test.

paths:
  ## Config paths
  /network-instances/network-instance/protocols/protocol/isis/global/config/net:
  /network-instances/network-instance/protocols/protocol/isis/global/afi-safi/af/config/afi-name:
  /network-instances/network-instance/protocols/protocol/isis/global/afi-safi/af/config/safi-name:
  /network-instances/network-instance/protocols/protocol/isis/global/afi-safi/af/config/enabled:
  /network-instances/network-instance/protocols/protocol/isis/global/afi-safi/af/config/suppress-interface-reachability:
  /network-instances/network-instance/protocols/protocol/isis/interfaces/interface/config/interface-id:
  /network-instances/network-instance/protocols/protocol/isis/interfaces/interface/config/enabled:
  /network-instances/network-instance/protocols/protocol/isis/interfaces/interface/config/passive:
  /network-instances/network-instance/protocols/protocol/isis/interfaces/interface/config/circuit-type:

  ## State paths
  /network-instances/network-instance/protocols/protocol/isis/global/state/net:
  /network-instances/network-instance/protocols/protocol/isis/global/afi-safi/af/state/afi-name:
  /network-instances/network-instance/protocols/protocol/isis/global/afi-safi/af/state/safi-name:
  /network-instances/network-instance/protocols/protocol/isis/global/afi-safi/af/state/enabled:
  /network-instances/network-instance/protocols/protocol/isis/global/afi-safi/af/state/suppress-interface-reachability:
  /network-instances/network-instance/protocols/protocol/isis/interfaces/interface/state/interface-id:
  /network-instances/network-instance/protocols/protocol/isis/interfaces/interface/state/enabled:
  /network-instances/network-instance/protocols/protocol/isis/interfaces/interface/state/passive:
  /network-instances/network-instance/protocols/protocol/isis/interfaces/interface/state/circuit-type:
  /network-instances/network-instance/protocols/protocol/isis/interfaces/interface/levels/level/adjacencies/adjacency/state/adjacency-state:

rpcs:
  gnmi:
    gNMI.Get:
    gNMI.Set:
    gNMI.Subscribe: