Performs Factory Reset

• Create a sample file in the harddisk of the router using gNOI PUT RPC
• Secure ZTP server should be up and running in the background for the router to boot up with the base config once factory reset command is sent on the box.
• Send out Factory reset via GNOI Raw API
  • Wait for the box to boot up via Secure ZTP
    • The base config is updated on the box via Secure ZTP
• Send a gNOI file STAT RPC to check if the file in the harddisk are removed as a part of verifying Factory reset.

• Check startup-config file exists in mount path.
• Perform the same steps are Scenario 1 for startup-config file.

The below yaml defines the OC paths intended to be covered by this test. OC paths used for test setup are not listed here.

rpcs:
  gnoi:
    factory_reset.FactoryReset.Start:
    file.File.Put:
    file.File.Stat: