bgp_2byte_4byte_asn_policy_test - openconfig/featureprofiles GitHub Wiki

RT-1.24: BGP 2-Byte and 4-Byte ASN support with policy

Summary

BGP 2-Byte and 4-Byte ASN support with policy

Procedure

  • Establish BGP sessions as follows and verify all the sessions are established:

    • ATE (2-byte) - DUT (4-byte) - eBGP IPv4 with ASN < 65535 on DUT side
    • ATE (2-byte) - DUT (4-byte) - eBGP IPv6 with ASN < 65535 on DUT side
    • ATE (4-byte) - DUT (4-byte) - eBGP IPv4
    • ATE (4-byte) - DUT (4-byte) - eBGP IPv6
    • ATE (2-byte) - DUT (4-byte) - iBGP IPv4 with ASN < 65535 on DUT side
    • ATE (4-byte) - DUT (4-byte) - iBGP IPv6 with ASN < 65535 on DUT side
    • ATE (4-byte) - DUT (4-byte) - iBGP IPv4
    • ATE (4-byte) - DUT (4-byte) - iBGP IPv6

  • Configure below policies and verify prefix count:

    • Policy to reject prefix with prefix filter
    • Policy to reject prefix with community filter
    • Policy to reject prefix with regex filter to match as-path

Config Parameter Coverage

  • /global/config/as
  • /neighbors/neighbor/config/peer-as
  • /neighbors/neighbor/config/local-as

Telemetry Parameter Coverage

  • /global/config/as
  • /neighbors/neighbor/config/peer-as
  • /neighbors/neighbor/config/local-as

OpenConfig Path and RPC Coverage

rpcs:
  gnmi:
    gNMI.Set:
    gNMI.Get:
    gNMI.Subscribe:
⚠️ **GitHub.com Fallback** ⚠️