aggregate_forwarding_viable_test - openconfig/featureprofiles GitHub Wiki
Ensure that forwarding-viable transition does not result in packet loss. Ensure that setting forwarding-viable=false impact only transmitting traffic on given port. Ensure that port set with forwarding-viable=false can receive all type of traffic and forward it normally (same as with forwarding-viable=true)
-
Connect ATE port-1 to DUT port-1, and ATE ports 2 through 9 to DUT ports 2-9. Configure ATE and DUT ports 2-9 to be part of a LAG.
-
For both Static LAG and LACP: [TODO: https://github.com/openconfig/featureprofiles/issues/1553;]
- Run traffic bidirectionally between ATA port-1 and ATE port2-9;
- ensure all ports has bidirectional traffic.
- ensure that traffic is load-balanced across all port2-9
- ensure ther is no packet losses in steady state (no congestion).
- Make the forwarding-viable transitions from TRUE --> FALSE on a single port within the LAG on the DUT (one of ports 2-9).
- ensure that above DUT's port is not sending any traffic to ATE (hence corresponding ATE port do not recive any traffic)
- ensure that DUT load-balance traffic across remaing ports of LAG (7 out of port2-9)
- ensure that above DUT's port is receiving traffic from coresponding ATE port
- ensure that there is no packet losses in steady state. (some very few packet could be lost right during transition)
- ensure that DUT recives ~equal traffic on all ports of LAG (all port2-9)
- Make the forwarding-viable transitions from FALSE --> TRUE on a single port within the LAG on the DUT (one of ports 2-9).
- ensure that above DUT's port is sending traffic to ATE (hence corresponding ATE port do recive traffic)
- ensure that DUT load-balance traffic across all ports of LAG (all port2-9)
- ensure that above DUT's port is receiving traffic from coresponding ATE port
- ensure that there is no packet losses in steady state. (some very few packet could be lost right during transition)
- ensure that DUT recives load-balanced traffic across all ports of LAG (all port2-9)
- Run traffic bidirectionally between ATA port-1 and ATE port2-9;
- /interfaces/interface/ethernet/config/aggregate-id
- /interfaces/interface/ethernet/config/forwarding-viable (from hercules) [ph1]
- /interfaces/interface/aggregation/config/lag-type
- /lacp/config/system-priority
- /lacp/interfaces/interface/config/name
- /lacp/interfaces/interface/config/interval
- /lacp/interfaces/interface/config/lacp-mode
- /lacp/interfaces/interface/config/system-id-mac
- /lacp/interfaces/interface/config/system-priority
None
None
vRX