actions_med_localpref_prepend_flow_control - openconfig/featureprofiles GitHub Wiki

RT-1.32: BGP policy actions - MED, LocPref, prepend, flow-control

Summary

  • Verify abilty to set MED to fixed value in export and import policy
  • Verify abilty to increment MED by fixed value in export and import policy
  • Verify abilty to set Local Preference to fixed value in export and import policy
  • Verify abilty to prepend AS path with 10 additional repetitions of local ASN in export and import policy
  • Verify abilty to prepend AS path with 10 additional repetitions of configured ASN in export and import policy
  • verify NEXT-STATEMENT flow-control action
  • Applicable to both IPv4 and IPv6 BGP neighbors

Testbed type

Procedure

Applying configuration

For each section of configuration below, prepare a gnmi.SetBatch with all the configuration items appended to one SetBatch. Then apply the configuration to the DUT in one gnmi.Set using the replace option.

WARNING: Replace operations should be performed at an appropriate level in the config tree to ensure that preexisting configuration objects necessary for DUT management access and base operation are not removed.

Initial Setup:

  • Connect DUT port-1, 2 to ATE port-1, 2
  • Configure IPv4/IPv6 addresses on the ports
  • Create an IPv4 networks i.e. ipv4-network-1 = 192.168.10.0/24 attached to ATE port-1
  • Create an IPv6 networks i.e. ipv6-network-1 = 2024:db8:128:128::/64 attached to ATE port-1
  • Create an IPv4 networks i.e. ipv4-network-2 = 192.168.20.0/24 attached to ATE port-2
  • Create an IPv6 networks i.e. ipv6-network-2 = 2024:db8:64:64::/64 attached to ATE port-2
  • Configure IPv4 and IPv6 iBGP between DUT Port-1 and ATE Port-1
    • /network-instances/network-instance/protocols/protocol/bgp/global/config
    • /network-instances/network-instance/protocols/protocol/bgp/global/afi-safis/afi-safi/config/
    • Advertise ipv4-network-1 = 192.168.10.0/24 and ipv6-network-1 = 2024:db8:128:128::/64 from ATE to DUT over the IPv4 and IPv6 eBGP session on port-1 with:
      • MED = 50
      • Local Preference = 50
  • Configure IPv4 and IPv6 eBGP between DUT Port-2 and ATE Port-2
    • /network-instances/network-instance/protocols/protocol/bgp/global/config
    • /network-instances/network-instance/protocols/protocol/bgp/global/afi-safis/afi-safi/config/
    • Advertise ipv4-network-2 = 192.168.20.0/24 and ipv6-network-2 = 2024:db8:64:64::/64 from ATE to DUT over the IPv4 and IPv6 eBGP session on port-2. The ATE should advertise both prefixes with:
      • MED = 50
      • Local Preference = 50

RT-1.32.1 [TODO: https://github.com/openconfig/featureprofiles/issues/2615]

IPv4, IPv6 eBGP set MED

Configure a route-policy to set MED
  • Configure an route-policy definition with the name med-policy
    • /routing-policy/policy-definitions/policy-definition/config/name
  • For routing-policy med-policy configure a statement with the name match-statement-1
    • /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
  • For routing-policy med-policy statement match-statement-1 set policy-result as ACCEPT_ROUTE
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
  • For routing-policy med-policy statement match-statement-1 set MED as 100
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-med
Configure bgp import and export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-2
  • Set default import and export policy to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Add policy-definition["med-policy"] to import-policy and export-policy leaf-lists.
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Configure default policies and remove any import, export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-1
  • Set default import and export policy to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Remove policy as import and export as a chain/list [med-policy]
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Verification
  • Verify that policies are successfully applied to the DUT BGP neighbor on ATE Port-2 and default policies are set to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Verify that there is no policies applied to the DUT BGP neighbor on ATE Port-1 and default policies are set to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy

Validate test results

  • Validate that the ATE receives the prefix ipv4-network-1 from DUT neighbor on ATE Port-2 and it has MED == 100
  • Validate that the ATE receives the prefix ipv6-network-1 from DUT neighbor on ATE Port-2 and it has MED == 100
  • Validate that the ATE receives the prefix ipv4-network-2 from DUT neighbor on ATE Port-1 and it has MED == 100
  • Validate that the ATE receives the prefix ipv6-network-2 from DUT neighbor on ATE Port-1 and it has MED == 100

RT-1.32.2 [TODO: https://github.com/openconfig/featureprofiles/issues/2615]

IPv4, IPv6 eBGP increase MED

Configure a route-policy to increase MED
  • Configure an route-policy definition with the name med-policy
    • /routing-policy/policy-definitions/policy-definition/config/name
  • For routing-policy med-policy configure a statement with the name match-statement-1
    • /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
  • For routing-policy med-policy statement match-statement-1 set policy-result as ACCEPT_ROUTE
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
  • For routing-policy med-policy statement match-statement-1 set MED as +100
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-med
Configure bgp import and export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-2
  • Set default import and export policy to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Add policy-definition["med-policy"] to import-policy and export-policy leaf-lists.
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Configure default policies and remove any import, export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-1
  • Set default import and export policy to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Remove policy as import and export as a chain/list [med-policy]
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Verification
  • Verify that policies are successfully applied to the DUT BGP neighbor on ATE Port-2 and default policies are set to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Verify that there is no policies applied to the DUT BGP neighbor on ATE Port-1 and default policies are set to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy

Validate test results

  • Validate that the ATE receives the prefix ipv4-network-1 from DUT neighbor on ATE Port-2 and it has MED == 150
  • Validate that the ATE receives the prefix ipv6-network-1 from DUT neighbor on ATE Port-2 and it has MED == 150
  • Validate that the ATE receives the prefix ipv4-network-2 from DUT neighbor on ATE Port-1 and it has MED == 150
  • Validate that the ATE receives the prefix ipv6-network-2 from DUT neighbor on ATE Port-1 and it has MED == 150

RT-1.32.3 [TODO: https://github.com/openconfig/featureprofiles/issues/2615]

IPv4, IPv6 iBGP set Local Preference

Configure a route-policy to set Local Preference
  • Configure an route-policy definition with the name lp-policy
    • /routing-policy/policy-definitions/policy-definition/config/name
  • For routing-policy lp-policy configure a statement with the name match-statement-1
    • /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
  • For routing-policy lp-policy statement match-statement-1 set policy-result as ACCEPT_ROUTE
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
  • For routing-policy lp-policy statement match-statement-1 set Local Preference as 100
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-local-pref
Configure bgp import and export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-1
  • Set default import and export policy to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Add policy-definition["lp-policy"] to import-policy and export-policy leaf-lists.
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Configure default policies and remove any import, export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-2
  • Set default import and export policy to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Remove all import and export policies
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Verification
  • Verify that policies are successfully applied to the DUT BGP neighbor on ATE Port-1 and default policies are set to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Verify that there is no policies applied to the DUT BGP neighbor on ATE Port-2 and default policies are set to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy

Validate test results

  • Validate that the ATE receives the prefix ipv4-network-1 from DUT neighbor on ATE Port-2 and it has LocPref == 100
  • Validate that the ATE receives the prefix ipv6-network-1 from DUT neighbor on ATE Port-2 and it has LocPref == 100
  • Validate that the ATE receives the prefix ipv4-network-2 from DUT neighbor on ATE Port-1 and it has LocPref == 100
  • Validate that the ATE receives the prefix ipv6-network-2 from DUT neighbor on ATE Port-1 and it has LocPref == 100

RT-1.32.4 [TODO: https://github.com/openconfig/featureprofiles/issues/2615]

IPv4, IPv6 eBGP NEXT-STATEMENT

Configure a route-policy set MED, LocalPreferemce is separate statements
  • Configure an route-policy definition with the name flow-control-policy
    • /routing-policy/policy-definitions/policy-definition/config/name
  • For routing-policy flow-control-policy configure a statement with the name match-statement-1
    • /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
  • For routing-policy flow-control-policy statement match-statement-1 set policy-result as NEXT-STATEMENT
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
  • For routing-policy flow-control-policy statement match-statement-1 set MED to 70
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-med
  • For routing-policy flow-control-policy configure a statement with the name match-statement-2
    • /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
  • For routing-policy flow-control-policy statement match-statement-2 set policy-result as ACCEPT-ROUTE
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
  • For routing-policy flow-control-policy statement match-statement-2 prepend as-path with local ASN 10 times
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-as-path-prepend/config/repeat-n
Configure bgp import and export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-2
  • Set default import and export policy to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Apply as import and export only policy - [flow-control-policy]
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Configure default policies and remove any import, export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-1
  • Set default import and export policy to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Remove all import and export policies
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Verification
  • Verify that policies are successfully applied to the DUT BGP neighbor on ATE Port-2 and default policies are set to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Verify that there is no policies applied to the DUT BGP neighbor on ATE Port-1 and default policies are set to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy

Validate test results

  • Validate that the ATE receives the prefix ipv4-network-1 from DUT neighbor on ATE Port-2 and it has MED == 70 and it has 11 ASN on as-path. All equal to DUT's ASN.
  • Validate that the ATE receives the prefix ipv6-network-1 from DUT neighbor on ATE Port-2 and it has MED == 70 and it has 11 ASN on as-path. All equal to DUT's ASN.
  • Validate that the ATE receives the prefix ipv4-network-2 from DUT neighbor on ATE Port-1 and it has MED == 70 and it has 11 ASN on as-path. All equal to DUT's ASN.
  • Validate that the ATE receives the prefix ipv6-network-2 from DUT neighbor on ATE Port-1 and it has MED == 70 and it has 11 ASN on as-path. All equal to DUT's ASN.

RT-1.32.5 [TODO: https://github.com/openconfig/featureprofiles/issues/2615]

IPv4, IPv6 eBGP prepend 10 x local ASN

Configure a route-policy to prepend 10
  • Configure an route-policy definition with the name prepend-policy
    • /routing-policy/policy-definitions/policy-definition/config/name
  • For routing-policy prepend-policy configure a statement with the name match-statement-1
    • /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
  • For routing-policy prepend-policy statement match-statement-1 set policy-result as ACCEPT_ROUTE
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
  • For routing-policy prepend-policy statement match-statement-1 prepend as-path with local ASN 10 times
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-as-path-prepend/config/repeat-n
Configure bgp import and export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-2
  • Set default import and export policy to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Apply as import and export only policy - [prepend-policy]
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Configure default policies and remove any import, export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-1
  • Set default import and export policy to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Remove all import and export policies
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Verification
  • Verify that policies are successfully applied to the DUT BGP neighbor on ATE Port-2 and default policies are set to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Verify that there is no policies applied to the DUT BGP neighbor on ATE Port-1 and default policies are set to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy

Validate test results

  • Validate that the ATE receives the prefix ipv4-network-1 from DUT neighbor on ATE Port-2 and it has 11 ASN on as-path. All equal to DUT's ASN.
  • Validate that the ATE receives the prefix ipv6-network-1 from DUT neighbor on ATE Port-2 and it has 11 ASN on as-path. All equal to DUT's ASN.
  • Validate that the ATE receives the prefix ipv4-network-2 from DUT neighbor on ATE Port-1 and it has 11 ASN on as-path. First equial to ATE port-2 ASN and other equal to DUT's ASN.
  • Validate that the ATE receives the prefix ipv6-network-2 from DUT neighbor on ATE Port-1 and it has 11 ASN on as-path. First equial to ATE port-2 ASN and other equal to DUT's ASN.

RT-1.32.6 [TODO: https://github.com/openconfig/featureprofiles/issues/2615]

IPv4, IPv6 eBGP prepend 10 x ASN

Configure a route-policy to prepend 10
  • Configure an route-policy definition with the name prepend-policy
    • /routing-policy/policy-definitions/policy-definition/config/name
  • For routing-policy prepend-policy configure a statement with the name match-statement-1
    • /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
  • For routing-policy prepend-policy statement match-statement-1 set policy-result as ACCEPT_ROUTE
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
  • For routing-policy prepend-policy statement match-statement-1 prepend as-path with 23456 ASN 10 times
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-as-path-prepend/config/repead-n
    • /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-as-path-prepend/config/asn
Configure bgp import and export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-2
  • Set default import and export policy to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Apply as import and export only policy - [prepend-policy]
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Configure default policies and remove any import, export policy for the DUT IPv4 and IPv6 BGP neighbors on ATE Port-1
  • Set default import and export policy to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Remove all import and export policies
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
Verification
  • Verify that policies are successfully applied to the DUT BGP neighbor on ATE Port-2 and default policies are set to REJECT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
  • Verify that there is no policies applied to the DUT BGP neighbor on ATE Port-1 and default policies are set to ACCEPT_ROUTE
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
    • /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy

Validate test results

  • Validate that the ATE receives the prefix ipv4-network-1 from DUT neighbor on ATE Port-2 and it has 11 ASN on as-path. First 10 equal to 23456 and last equal to DUT's ASN.
  • Validate that the ATE receives the prefix ipv6-network-1 from DUT neighbor on ATE Port-2 and it has 11 ASN on as-path. First 10 equal to 23456 and last equal to DUT's ASN.
  • Validate that the ATE receives the prefix ipv4-network-2 from DUT neighbor on ATE Port-1 and it has 11 ASN on as-path. First equal to ATE port-2 ASN and other 10 equal to 23456 ASN.
  • Validate that the ATE receives the prefix ipv6-network-2 from DUT neighbor on ATE Port-1 and it has 11 ASN on as-path. First equal to ATE port-2 ASN and other 10 equal to 23456 ASN.

OpenConfig Path and RPC Coverage

The below yaml defines the OC paths intended to be covered by this test.

paths:
    ## Config parameter coverage
    /network-instances/network-instance/protocols/protocol/bgp/global/afi-safis/afi-safi/config/enabled:
    /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy:
    /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy:
    /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy:
    /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy:
    /routing-policy/policy-definitions/policy-definition/config/name:
    /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-local-pref:
    /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-med:
    /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-as-path-prepend/config/asn:
    /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-as-path-prepend/config/repeat-n:
    /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result:
    /routing-policy/policy-definitions/policy-definition/statements/statement/config/name:

    ## Telemetry parameter coverage
    /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy:
    /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy:
    /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/default-import-policy:
    /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/default-export-policy:

    ## Protocol/RPC Parameter Coverage
rpcs:
  gnmi:
    gNMI.Subscribe:
    gNMI.Set:

Required DUT platform

  • FFF
⚠️ **GitHub.com Fallback** ⚠️