acl_large_scale - openconfig/featureprofiles GitHub Wiki

ACL-1.3: Large Scale ACL with TCAM profile

Summary

Use an ACL to match packets based on a combination of:

  • L3 src/dst IPv4 address and DSCP value
  • L3 src/dst IPv6 address and DSCP value
  • L3 src/dst IPv4 address, L4 src/dst port and DSCP value
  • L3 src/dst IPv6 address, L4 src/dst port and DSCP value

Testbed type

Topology:

graph LR;
A[ATE PORT1] <--IPv4-IPv6--> B[DUT:PORT1];
C[ATE:PORT2] <--IPv4-IPv6--> D[DUT:PORT2];
E[ATE:PORT3] <--IPv4-IPv6--> F[DUT:PORT3];
G[ATE:PORT4] <--IPv4-IPv6--> H[DUT:PORT4];
Loading

Procedure

Initial setup

  • Connect DUT port-1, 2, 3, 4 to ATE port-1, 2, 3, 4 respectively

  • Configure IPv4 and IPv6 addresses on DUT and ATE ports as shown below

    • DUT port-1 IPv4 address dp1-v4 = 192.168.1.1/30

    • ATE port-1 IPv4 address ap1-v4 = 192.168.1.2/30

    • DUT port-1 IPv6 address dp1-v6 = 2001:DB8::1/126

    • ATE port-1 IPv6 address ap1-v6 = 2001:DB8::2/126

    • DUT port-2 IPv4 address dp2-v4 = 192.168.1.5/30

    • ATE port-2 IPv4 address ap2-v4 = 192.168.1.6/30

    • DUT port-2 IPv6 address dp2-v6 = 2001:DB8::5/126

    • ATE port-2 IPv6 address ap2-v6 = 2001:DB8::6/126

    • DUT port-3 IPv4 address dp3-v4 = 192.168.1.9/30

    • ATE port-3 IPv4 address ap3-v4 = 192.168.1.10/30

    • DUT port-3 IPv6 address dp3-v6 = 2001:DB8::9/126

    • ATE port-3 IPv6 address ap3-v6 = 2001:DB8::a/126

    • DUT port-4 IPv4 address dp4-v4 = 192.168.1.13/30

    • ATE port-4 IPv4 address ap4-v4 = 192.168.1.14/30

    • DUT port-4 IPv6 address dp4-v6 = 2001:DB8::c/126

    • ATE port-4 IPv6 address ap4-v6 = 2001:DB8::d/126

  • Configure eBGP from each ATE port and establish a connection with DUT such that DUT port-1 (AS 65001) - ATE port-1 (AS 65002) DUT port-2 (AS 65001) - ATE port-2 (AS 65003) DUT port-3 (AS 65001) - ATE port-3 (AS 65004) DUT port-4 (AS 65001) - ATE port-4 (AS 65005)

  • Configure 100k unique prefixes of multiple prefix lengths for IPv4 and IPv6 from ATE using the eBGP peers such that 25k routes is advertised from each eBGP peer corresponding to ATE ports *IPv4

    • Mask lengths of /22, /24, /29, /30, /32
    • Distribution is /22 - 5%, /24 - 35%, /30 - 30%, /32 - 30%
    • Prefixes blocks to be configured are
      • 100.1.0.0 block for /22 - pfxv4-1
      • 50.1.0.0 block for /24 - pfxv4-2
      • 200.1.0.0 block for /30 - pfxv4-3
      • 210.1.0.0 block for /32 - pfxv4-4 *IPv6
    • Mask lengths of /48, /96, /126, / 128
    • Distribution is /48 - 20%, /96 - 20%, /126 - 30%, /128 - 30%
    • Prefixes blocks to be configured are
      • 1000:1::0 block for /48 - pfxv6-1
      • 5000:1::0 block for /96 - pfxv6-2
      • 1500:1::0 block for /126 - pfxv6-3
      • 2000:1::0 block for /128 - pfxv6-4

  • Configure 256 unique prefixes for source prefix lists of multiple prefix lengths for IPv4 and IPv6 from ATE using the eBGP peers such that 64 routes is advertised from each eBGP peer corresponding to ATE ports

    *IPv4 - prfx-list-src-ipv4-blk1 - 60.1.0.0/24 - prfx-list-src-ipv4-blk2 - 70.1.0.0/26 - prfx-list-src-ipv4-blk3 - 80.1.0.0/27 - prfx-list-src-ipv4-blk4 - 90.1.0.0/30

    *IPv6 - prfx-list-src-ipv6-blk1 - 1500:1::/48 - prfx-list-src-ipv6-blk2 - 2500:1::/64 - prfx-list-src-ipv6-blk3 - 3500:1::/96 - prfx-list-src-ipv6-blk4 - 4500:1::/126

  • Configure 4 unique prefixes for destination prefix lists for IPv4 and IPv6 from ATE such that 1 route is advertised from each eBGP peer corresponding to ATE ports

    *IPv4 - prfx-list-dst-ipv4-blk1 - 61.1.0.0/30 - prfx-list-dst-ipv4-blk2 - 61.2.0.0/30 - prfx-list-dst-ipv4-blk3 - 61.3.0.0/30 - prfx-list-dst-ipv4-blk4 - 61.4.0.0/30

    *IPv5 - prfx-list-src-ipv6-blk1 - 1500:2::/112 - prfx-list-src-ipv6-blk2 - 2500:2::/112 - prfx-list-src-ipv6-blk3 - 3500:2::/112 - prfx-list-src-ipv6-blk4 - 4500:2::/112

  • Configure the traffic in a full mesh way for IPv4 and IPv6 such that *IPv4

    • Each prefix length traffic is sent to every other prefix length
    • /22 -> /24, /30, /32 and similarly other prefix length too
    • Add TCP protocol to the header while create the traffic with port ranges from 100 - 65000 *IPv6
    • Each prefix length traffic is sent to every other prefix length
    • /48 -> /96, /126, /128 and similarly for other prefix lengths too
    • Add TCP protocol to the header while create the traffic with port ranges from 100 - 65000

ACL-1.1.1 - ACL IPv4 Address scale

  • Configure an ACL name ACL_IPV4_Match_length_22_tcp_range matching:

    • ACL entry-1 action accept
      • Src of pfxv4-1
      • Dest of pfxv4-2, pfxv4-3, pfxv4-4
      • Src TCP TCP ports = 900, 80, 30, 40, 150, 1600, 2700, 21000-45000, 30000-50000
      • Dst TCP TCP ports = 100-20000, 800, 900

  • Configure an ACL type ACL_IPV4_Match_length_24_tcp_range matching:

    • ACL entry-1 action accept
      • Src of pfxv4-4
      • Dest of pfxv4-1, pfxv4-2, pfxv4-4
      • Src TCP TCP ports = 100, 200, 300, 400, 500, 600, 700, 2000-4000, 20000-40000
      • Dst TCP TCP ports = 100-20000

  • Configure an ACL type ACL_IPV4_Match_high_scale_statements matching:

    • Create 200 statements under this ACL of type IPv4
    • For statements 1-100 to be configured by action accept
    • For statements 126-150 to be configured by action as accept & log as syslog
    • For statements 151-175 to be configured by action accept
    • For statements 176-200 to be configured by action accept

  • Apply the ACLs on to the DUT port in the below way ACL Name Port Direction

    ACL_IPV4_Match_length_22_tcp_range DUT-port1 Ingress ACL_IPV4_Match_length_24_tcp_range DUT port2 Ingress ACL_IPV4_Match_high_scale_statements DUT port3 Ingress ACL_IPV4_Match_high_scale_statements DUT port4 Egress

  • Push the configuration on the DUT and the traffic configurations profile to the ATE. Start the protocols and traffic.

  • Verification telemetry

    • Verify that all ACL's are applied to the DUT ports successfully in the appropriate direction ingress & egress
    • Verify that there is no traffic loss for any of the traffic profiles
    • Verify that the ACL ACL_IPV4_Match_high_scale_statements has logs and counters populated for the relevant statements.
    • Verify the resource utilization of the device in terms of memory consumption for the ACL's attached to the DUT ports.

ACL-1.1.2 - ACL IPv6 Address scale

  • Configure an ACL type ACL_IPV6_Match_length_48_tcp_range matching:

    • ACL entry-1 action accept
      • Src : pfxv6-1
      • Dest : pfxv6-2, pfxv6-3, pfxv6-4
      • Src TCP : TCP ports = 900, 80, 30, 40, 150, 1600, 2700, 21000-45000, 30000-50000
      • Dst TCP : TCP ports = 100-20000, 800, 900
      • Action : accept

  • Configure an ACL type ACL_IPV6_Match_length_96_tcp_range matching: * Src : pfxv6-4 * Dest : pfxv6-1, pfxv6-2, pfxv6-4 * Src TCP : TCP ports = 100, 200, 300, 400, 500, 600, 700, 2000-4000, 20000-40000 * Dst TCP : TCP ports = 100-20000 * Action : accept

  • Configure an ACL type ACL_IPV6_Match_high_scale_statements matching:

    • Create 200 permit/deny statements under this ACL of type IPv6
    • For statements 1-125 to be configured by accept-action permit only
    • For statements 126-150 to be configured by accept-actions accept & log-action as syslog
    • For statements 151-175 to be configured by action accept & count
    • For statements 176-200 to be configured by action accept only

  • Apply the ACLs on to the DUT port in the below way ACL Name Port Direction

    ACL_IPV6_Match_length_48_tcp_range DUT-port1 Ingress ACL_IPV6_Match_length_96_tcp_range DUT port2 Ingress ACL_IPV6_Match_high_scale_statements DUT port3 Ingress ACL_IPV6_Match_high_scale_statements DUT port4 Egress

  • Push the configuration on the DUT and the traffic configurations profile to the ATE. Start the protocols and traffic.

  • Verification telemetry

    • Verify that all ACL's are applied to the DUT ports successfully in the appropriate direction ingress & egress
    • Verify that there is no traffic loss for any of the traffic profiles
    • Verify that the ACL ACL_IPV6_Match_high_scale_statements has logs and counters populated for the relevant statements.
    • Verify the resource utilization of the device in terms of memory consumption for the ACL's attached to the DUT ports.

ACL-1.2.1 - ACL IPv4 Address scale using prefix-list

  • Create 16 ipv4 prefix-list as source prefix list to match 256 prefixes with wide range of prefixes of length /24, /28, /28, /30 from block prfx-list-src-ipv4-blk1, prfx-list-src-ipv4-blk2, prfx-list-src-ipv4-blk3 prfx-list-src-ipv4-blk4 respectively using a naming convention of prfx-list-src-block-x where x represents the prefixes from respective block.

  • Create 4 ipv4 prefix-list as destination prefix list prfx-list-dst-ipv4-blk1, prfx-list-dst-ipv4-blk2, prfx-list-dst-ipv4-blk3, prfx-list-dst-ipv4-blk4

  • Configure an ACL type ACL_IPV4_Match_using_prefix_list_prfxv4-1 with 16 statements with combination of the following

    • SrcIP - any of the 16 prefix lists prfx-list-src-block-x
    • DstIP - prfx-list-dst-ipv4-blk1
    • SrcTCP port - Any random port TCP port from 100-65500
    • DstTCP port - Any random port TCP port from 100-65500
    • Action - ACCEPT
    • Log action - SYSLOG

  • Configure an ACL type ACL_IPV4_Match_using_prefix_list_prfxv4-2 with 16 statements with combination of the following

    • SrcIP - any of the 16 prefix lists prfx-list-src-block-x
    • DstIP - prfx-list-dst-ipv4-blk2
    • SrcTCP port - TCP ports 115, 215, 980, 1090, 8000
    • DstTCP port - TCP port ranges 30000-45000
    • Action - ACCEPT

  • Configure an ACL type ACL_IPV4_Match_using_prefix_list_prfxv4-3 with 16 statements with combination of the following

    • SrcIP - any of the 16 prefix lists prfx-list-src-block-x
    • DstIP - prfx-list-dst-ipv4-blk3
    • SrcTCP port - TCP port 280, 700, 1150, 5110, 1899
    • DstTCP port - TCP port range 5000-10999
    • Action - ACCEPT
    • Log action - SYSLOG

  • Configure an ACL type ACL_IPV4_Match_using_prefix_list_prfxv4-4 with 16 statements with combination of the following

    • SrcIP - any of the 16 prefix lists prfx-list-src-block-x
    • DstIP - prfx-list-dst-ipv4-blk4
    • SrcTCP port - TCP port ranges 50-100, 200-5000, 800-6550
    • DstTCP port - TCP port 80
    • Action - ACCEPT

  • Apply the ACL in the following way ACL Name Port Direction

    ACL_IPV4_Match_using_prefix_list_prfxv4-1 DUT port1 Ingress ACL_IPV4_Match_using_prefix_list_prfxv4-2 DUT port2 Ingress ACL_IPV4_Match_using_prefix_list_prfxv4-3 DUT port3 Ingress ACL_IPV4_Match_using_prefix_list_prfxv4-4 DUT port4 Ingress

  • Push the configuration on the DUT and the traffic configurations profile to the ATE. Start the protocols and traffic.

  • Verification telemetry

    • Verify that all ACL's are applied to the DUT ports successfully in the appropriate direction ingress & egress
    • Verify that there is no traffic loss for any of the traffic profiles
    • Verify that the ACL has logs and counters populated for the relevant statements.
    • Verify the resource utilization of the device in terms of memory consumption for the ACL's attached to the DUT ports.

ACL-1.2.2 - ACL IPv6 Address scale using prefix-list

  • Create 16 ipv6 prefix-list as source prefix list to match 256 prefixes wide range of prefixes of length /48, /96, /126, /128 from blocks prfx-list-src-ipv6-blk1, prfx-list-src-ipv6-blk2, prfx-list-src-ipv6-blk3, prfx-list-src-ipv6-blk4 respectively using a naming convention of prfx-list-src-block-x where x represents the sequence number.

  • Create 4 ipv6 prefix-list as destination prefix list to match 100 prefixes of prefixes lengths /48, /96, /126, /128 from block prfx-list-dst-ipv6-blk1, prfx-list-dst-ipv6-blk1,prfx-list-dst-ipv6-blk1,prfx-list-dst-ipv6-blk1

  • Configure an ACL type ACL_IPV6_Match_using_prefix_list_prfxv6-1 with 16 statements with combination of the following

    • SrcIP - any of the 16 prefix lists prfx-list-src-block-x
    • DstIP - prfx-list-dst-ipv6-blk1
    • SrcTCP port - Any random port TCP port from 100-65500
    • DstTCP port - Any random port TCP port from 100-65500
    • Action - ACCEPT
    • Log action - SYSLOG

  • Configure an ACL type ACL_IPV6_Match_using_prefix_list_prfxv6-2 with 16 statements with combination of the following

    • SrcIP - any of the 16 prefix lists prfx-list-src-block-x
    • DstIP - prfx-list-dst-ipv6-blk2
    • SrcTCP port - TCP ports 115, 215, 980, 1090, 8000
    • DstTCP port - TCP port ranges 30000-45000
    • Action - ACCEPT

  • Configure an ACL type ACL_IPV6_Match_using_prefix_list_prfxv6-3 with 16 statements with combination of the following

    • SrcIP - any of the 16 prefix lists prfx-list-src-block-x
    • DstIP - prfx-list-dst-ipv6-blk3
    • SrcTCP port - TCP port 280, 700, 1150, 5110, 1899
    • DstTCP port - TCP port range 5000-10999
    • Action - ACCEPT
    • Log action - SYSLOG

  • Configure an ACL type ACL_IPV6_Match_using_prefix_list_prfxv6-4 with 16 statements with combination of the following

    • SrcIP - any of the 16 prefix lists prfx-list-src-block-x
    • DstIP - prfx-list-dst-ipv6-blk4
    • SrcTCP port - TCP port ranges 50-100, 200-5000, 800-6550
    • DstTCP port - TCP port 80
    • Action - ACCEPT

  • Apply the ACL in the following way ACL Name Port Direction

    ACL_IPV6_Match_using_prefix_list_prfxv6-1 DUT port1 Ingress ACL_IPV6_Match_using_prefix_list_prfxv6-2 DUT port2 Ingress ACL_IPV6_Match_using_prefix_list_prfxv6-3 DUT port3 Ingress ACL_IPV6_Match_using_prefix_list_prfxv6-4 DUT port4 Ingress

  • Push the configuration on the DUT and the traffic configurations profile to the ATE. Start the protocols and traffic.

  • Verification telemetry

    • Verify that all ACL's are applied to the DUT ports successfully in the appropriate direction ingress & egress
    • Verify that there is no traffic loss for any of the traffic profiles
    • Verify that the ACL has logs and counters populated for the relevant statements.
    • Verify the resource utilization of the device in terms of memory consumption for the ACL's attached to the DUT ports.

Canonical OC Configuration

IPv4 ACL

{
 "data": {
  "Cisco-IOS-XR-ipv4-acl-cfg:ipv4-acl-and-prefix-list": {
   "accesses": {
    "access": [
     {
      "access-list-name": "ACL_IPV4_Match_length_22",
      "access-list-entries": {
       "access-list-entry": [
        {
         "sequence-number": 10,
         "grant": "permit",
         "protocol": "tcp",
         "source-network": {
          "source-address": "100.1.1.1",
          "source-prefix-length": 22
         },
         "destination-network": {
          "destination-address": "50.1.1.1",
          "destination-prefix-length": 24
         },
         "destination-port": {
          "destination-operator": "equal",
          "first-destination-port": 900
         },
         "sequence-str": "10"
        }
       ]
      }
     }
    ]
   }
  },
  "Cisco-IOS-XR-um-ipv4-access-list-cfg:ipv4": {
   "access-lists": {
    "access-list": [
     {
      "access-list-name": "ACL_IPV4_Match_length_22",
      "sequences": {
       "sequence": [
        {
         "sequence-number": 10,
         "permit": {
          "protocol": "tcp",
          "source": {
           "address": "100.1.1.1",
           "prefix-length": 22
          },
          "destination": {
           "address": "50.1.1.1",
           "prefix-length": 24,
           "port": {
            "eq": 900
           }
          }
         }
        }
       ]
      }
     }
    ]
   }
  }
 }
}

{
 "data": {
  "Cisco-IOS-XR-ipv4-acl-cfg:ipv4-acl-and-prefix-list": {
   "accesses": {
    "access": [
     {
      "access-list-name": "ACL_IPV4_Match_length_24_tcp_range",
      "access-list-entries": {
       "access-list-entry": [
        {
         "sequence-number": 10,
         "grant": "permit",
         "protocol": "tcp",
         "source-network": {
          "source-address": "210.1.1.1"
         },
         "destination-network": {
          "destination-address": "100.1.1.1",
          "destination-prefix-length": 22
         },
         "destination-port": {
          "destination-operator": "equal",
          "first-destination-port": 100
         },
         "sequence-str": "10"
        }
       ]
      }
     }
    ]
   }
  },
  "Cisco-IOS-XR-um-ipv4-access-list-cfg:ipv4": {
   "access-lists": {
    "access-list": [
     {
      "access-list-name": "ACL_IPV4_Match_length_24_tcp_range",
      "sequences": {
       "sequence": [
        {
         "sequence-number": 10,
         "permit": {
          "protocol": "tcp",
          "source": {
           "host": "210.1.1.1"
          },
          "destination": {
           "address": "100.1.1.1",
           "prefix-length": 22,
           "port": {
            "eq": 100
           }
          }
         }
        }
       ]
      }
     }
    ]
   }
  }
 }
}

IPv6 ACL

{
 "data": {
  "Cisco-IOS-XR-ipv6-acl-cfg:ipv6-acl-and-prefix-list": {
   "accesses": {
    "access": [
     {
      "name": "ACL_IPV6_Match_length_48_tcp_range",
      "access-list-entries": {
       "access-list-entry": [
        {
         "sequence-number": 10,
         "grant": "permit",
         "protocol": "tcp",
         "source-network": {
          "source-address": "1000:1::1",
          "source-wild-card-bits": 48
         },
         "destination-network": {
          "destination-address": "5000:1::1",
          "destination-wild-card-bits": 96
         },
         "source-port": {
          "source-operator": "equal",
          "first-source-port": "www"
         },
         "destination-port": {
          "destination-operator": "equal",
          "first-destination-port": 800
         },
         "sequence-str": "10"
        }
       ]
      }
     },
     {
      "name": "ACL_IPV6_Match_length_96_tcp_range",
      "access-list-entries": {
       "access-list-entry": [
        {
         "sequence-number": 10,
         "grant": "permit",
         "protocol": "tcp",
         "source-network": {
          "source-address": "2000:1::1",
          "source-wild-card-bits": 128
         },
         "destination-network": {
          "destination-address": "1500:1::1",
          "destination-wild-card-bits": 126
         },
         "source-port": {
          "source-operator": "equal",
          "first-source-port": 8000
         },
         "sequence-str": "10"
        },
        {
         "sequence-number": 20,
         "grant": "permit",
         "protocol": "tcp",
         "source-network": {
          "source-address": "2000:1::1",
          "source-wild-card-bits": 128
         },
         "destination-network": {
          "destination-address": "1500:1::1",
          "destination-wild-card-bits": 126
         },
         "source-port": {
          "source-operator": "equal",
          "first-source-port": 8000
         },
         "sequence-str": "20"
        }
       ]
      }
     }
    ]
   }
  },
  "Cisco-IOS-XR-um-ipv6-access-list-cfg:ipv6": {
   "access-lists": {
    "access-list": [
     {
      "access-list-name": "ACL_IPV6_Match_length_48_tcp_range",
      "sequences": {
       "sequence": [
        {
         "sequence-number": 10,
         "permit": {
          "protocol": "tcp",
          "source": {
           "address": "1000:1::1",
           "prefix-length": 48,
           "port": {
            "eq": "WWW"
           }
          },
          "destination": {
           "address": "5000:1::1",
           "prefix-length": 96,
           "port": {
            "eq": 800
           }
          }
         }
        }
       ]
      }
     },
     {
      "access-list-name": "ACL_IPV6_Match_length_96_tcp_range",
      "sequences": {
       "sequence": [
        {
         "sequence-number": 10,
         "permit": {
          "protocol": "tcp",
          "source": {
           "host": "2000:1::1",
           "port": {
            "eq": 8000
           }
          },
          "destination": {
           "address": "1500:1::1",
           "prefix-length": 126
          }
         }
        },
        {
         "sequence-number": 20,
         "permit": {
          "protocol": "tcp",
          "source": {
           "host": "2000:1::1",
           "port": {
            "eq": 8000
           }
          },
          "destination": {
           "address": "1500:1::1",
           "prefix-length": 126
          }
         }
        }
       ]
      }
     }
    ]
   }
  }
 }
}

OpenConfig Path and RPC Coverage

paths:
  # base acl paths
  /acl/acl-sets/acl-set/config/name:
  /acl/acl-sets/acl-set/config/type:
  /acl/acl-sets/acl-set/acl-entries/acl-entry/config/sequence-id:
  /acl/acl-sets/acl-set/acl-entries/acl-entry/config/description:
  
  # ipv4/v6 address match
  /acl/acl-sets/acl-set/acl-entries/acl-entry/ipv4/config/source-address:
  /acl/acl-sets/acl-set/acl-entries/acl-entry/ipv4/config/destination-address:
  /acl/acl-sets/acl-set/acl-entries/acl-entry/ipv6/config/source-address:
  /acl/acl-sets/acl-set/acl-entries/acl-entry/ipv6/config/destination-address:

  # paths for DSCP matching
  /acl/acl-sets/acl-set/acl-entries/acl-entry/ipv4/config/dscp:
  /acl/acl-sets/acl-set/acl-entries/acl-entry/ipv6/config/dscp:

  # paths for L4 ports
  /acl/acl-sets/acl-set/acl-entries/acl-entry/transport/config/source-port:
  /acl/acl-sets/acl-set/acl-entries/acl-entry/transport/config/destination-port:

  # paths for ACL action
  /acl/acl-sets/acl-set/acl-entries/acl-entry/actions/config/forwarding-action:
  /acl/acl-sets/acl-set/acl-entries/acl-entry/actions/config/log-action:
 
  # prefix-set config ipv4, ipv6
  /defined-sets/ipv4-prefix-sets/ipv4-prefix-set/name:
  /defined-sets/ipv4-prefix-sets/ipv4-prefix-set/config/name:
  /defined-sets/ipv4-prefix-sets/ipv4-prefix-set/config/description:
  /defined-sets/ipv4-prefix-sets/ipv4-prefix-set/config/prefix:
  /defined-sets/ipv6-prefix-sets/ipv6-prefix-set/name:
  /defined-sets/ipv6-prefix-sets/ipv6-prefix-set/config/name:
  /defined-sets/ipv6-prefix-sets/ipv6-prefix-set/config/description:
  /defined-sets/ipv6-prefix-sets/ipv6-prefix-set/config/prefix:

  # prefix-set state ipv4, ipv6
  /defined-sets/ipv4-prefix-sets/ipv4-prefix-set/state/name:
  /defined-sets/ipv4-prefix-sets/ipv4-prefix-set/state/description:
  /defined-sets/ipv4-prefix-sets/ipv4-prefix-set/state/prefix:
  /defined-sets/ipv6-prefix-sets/ipv6-prefix-set/state/name:
  /defined-sets/ipv6-prefix-sets/ipv6-prefix-set/state/description:
  /defined-sets/ipv6-prefix-sets/ipv6-prefix-set/state/prefix:
  /acl/acl-sets/acl-set/acl-entries/acl-entry/state/matched-packets:

rpcs:
  gnmi:
    gNMI.Set:
      replace: true

Minimum DUT platform requirement

FFF

⚠️ **GitHub.com Fallback** ⚠️