displays - olikraus/ucglib GitHub Wiki

This page describes supported displays. Ucglib only supports color displays with internal controller and local display RAM. The setup for Ucglib depends on the internal controller, which is build into the color display.

Alternative names and descriptions for the pins:

Ucglib Pin Name	Description	Other Names
sclk	SPI clock signal	CLK, SCK
data	SPI data signal	DIN, SDI, MOSI
cd	Command / Data	D/C, DC, A0
cs	Chip select	CS
reset	Reset input	RESET, RES

ST7735

Type: Color TFT
Dimension: 128x160
Color Depth: 18 Bit
Interfaces: HW SPI, SW SPI
Tutorial: How to Connect a ST7735 Display

Arduino Constructor

Constructor	Description
Ucglib_ST7735_18x128x160_SWSPI ucg(`sclk`, `data`, `cd`, `cs`, `[reset]`)	Software SPI
Ucglib_ST7735_18x128x160_HWSPI ucg(`cd`, `cs`, `[reset]`)	Hardware SPI

Device Procedures

Controller Device: ucg_dev_st7735_18x128x160
Extensions: ucg_ext_st7735_18, ucg_ext_none

ILI9341

Type: Color TFT
Dimension: 240x320
Color Depth: 18 Bit
Interfaces: HW SPI, SW SPI
Tutorial: How to connect a ILI9341 display

Arduino Constructor

Constructor	Description
Ucglib_ILI9341_18x240x320_SWSPI ucg(`sclk`, `data`, `cd`, `cs`, `[reset]`)	Software SPI
Ucglib_ILI9341_18x240x320_HWSPI ucg(`cd`, `cs`, `[reset]`)	Hardware SPI

Device Procedures

Controller Device: ucg_dev_ili9341_18x240x320
Extensions: ucg_ext_ili9341_18, ucg_ext_none

ILI9163

Type: Color TFT
Dimension: 128x128
Color Depth: 18 Bit
Interfaces: HW SPI, SW SPI
Tutorial: Not yet available

Arduino Constructor

Constructor	Description
Ucglib_ILI9163_18x128x128_SWSPI ucg(`sclk`, `data`, `cd`, `cs`, `[reset]`)	Software SPI
Ucglib_ILI9163_18x128x128_HWSPI ucg(`cd`, `cs`, `[reset]`)	Hardware SPI

Device Procedures

Controller Device: ucg_dev_ILI9163_18x128x160
Extensions: ucg_ext_ILI9163_18, ucg_ext_none

PCF8833

Type: Color TFT
Dimension: 132x132
Color Depth: 16 Bit
Interfaces: HW SPI, SW SPI
Tutorial: How to connect a PCF8833 display

Arduino Constructor

Constructor	Description
Ucglib_PCF8833_16x132x132_SWSPI ucg(`sclk`, `data`, `cd`, `cs`, `[reset]`)	Software SPI
Ucglib_PCF8833_16x132x132_HWSPI ucg(`cd`, `cs`, `[reset]`)	Hardware SPI

Device Procedures

Controller Device: ucg_dev_pcf8833_16x132x132
Extensions: ucg_ext_pcf8833_16, ucg_ext_none

SSD1331

Type: Color OLED
Dimension: 96x64
Color Depth: 16 Bit (Note: The interface uses 18 bit transfers, but the display only has 16 bit color depth)
Interfaces: HW SPI, SW SPI
Tutorial: n.a.

Arduino Constructor

Constructor	Description
Ucglib_SSD1331_18x96x64_UNIVISION_SWSPI ucg(`sclk`, `data`, `cd`, `cs`, `[reset]`)	Software SPI
Ucglib_SSD1331_18x96x64_UNIVISION_HWSPI ucg(`cd`, `cs`, `[reset]`)	Hardware SPI

SSD1351

Type: Color OLED
Dimension: 128x128
Color Depth: 18 Bit
Interfaces: HW SPI, SW SPI
Tutorial: n.a.

Arduino Constructor

Constructor	Description
Ucglib_SSD1351_18x128x128_SWSPI ucg(`sclk`, `data`, `cd`, `cs`, `[reset]`)	Software SPI, GPIO set to 0 (ILSoft OLED)
Ucglib_SSD1351_18x128x128_HWSPI ucg(`cd`, `cs`, `[reset]`)	Hardware SPI, GPIO set to 0 (ILSoft OLED)
Ucglib_SSD1351_18x128x128_FT_SWSPI ucg(`sclk`, `data`, `cd`, `cs`, `[reset]`)	Software SPI, GPIO set to 1 (Freetronics OLED)
Ucglib_SSD1351_18x128x128_FT_HWSPI ucg(`cd`, `cs`, `[reset]`)	Hardware SPI, GPIO set to 1 (Freetronics OLED)

Device Procedures

Controller Devices: ucg_dev_ssd1351_18x128x128_ilsoft, ucg_dev_ssd1351_18x128x128_ft
Extensions: ucg_ext_ssd1351_18, ucg_ext_none

LD50T6160

Type: Color OLED
Dimension: 160x128
Color Depth: 18 Bit
Interfaces: 6 Bit parallel

Arduino Constructor

Constructor	Description
Ucglib_LD50T6160_18x160x128_6Bit ucg( `d0`, `d1`, `d2`, `d3`, `d4`, `d5`, `wr`, `cd`, `[cs]`, `[reset]`)	6 Bit parallel

Device Procedures

Controller Device: ucg_dev_ld50t6160_18x160x128_samsung
Extensions: ucg_ext_ld50t6160_18, ucg_ext_none

SEPS225

Type: Color OLED
Dimension: 96x64
Color Depth: 16 Bit (Note: The display supports 18 bit, but the SPI interface of the controller only allows 16 bit color depth with byte transfers)
Interfaces: HW SPI, SW SPI
Tutorial: n.a.

Arduino Constructor

Constructor	Description
Ucglib_SEPS225_16x128x128_UNIVISION_SWSPI ucg(`sclk`, `data`, `cd`, `cs`, `[reset]`)	Software SPI
Ucglib_SEPS225_16x128x128_UNIVISION_SWSPI ucg(`cd`, `cs`, `[reset]`)	Hardware SPI