installation - offer-shmuely/rf2-touch-suite-edgeTx GitHub Wiki

Prerequisites: For a fully integrated widget we need some telemetry sensors enabled in Rotorflight: Telemetry enabled Sensors : Voltage Current Profiles Rates ….

copy to tx

Go to releases and download the latest version of Rfsuite edgetx

Extract the zip file and copy the Script and widgets folder tot the sd-card of the Edgetx radio.

Radio setup

Start the radio and go to System -> Tools. Click on the _RF2 Touch script. The first time it will compile all the files.

When the compiling is finished it will return to the tools page. Click then again on _RF2Touch and it should open like this:

core widgets settings

Go to homescreen

Press the roller and click on Screens Settings

Click on the top bar and click on Setup widgets

Click on the top bar at a free slot for a widget. In this case on the right side. Select here rf2_widget. This widget will take care of the connection to the FC.

widget setting

At the top bar you can also use a name widget e.g. rf2_name. This will display the name of the aircraft

Click on return and go back to the screen settings. Click on screen 1 make it a full screen layout and disable the Flightmode, sliders, trims and mirror. Click on Setup widgets.

Click on the screen in the middle and select here rf2_dash in the list.

Click multiple on return untill you are back in the screen. This will look like the picture below if you are connected with the heli.