Workbench Usage - oSoDirty/DNA_Keycards GitHub Wiki

The workbench is used to re-chip and reprogram keycards. They can either be crafted by players, or placed by server owner to add some excitement to the process.

To start, you need to craft the workbench kit. To do so, you need 4 sticks, and a metal wire. Craft them as you would any other kit in game.

To place the kit, you must first obtain a soldering kit, and a helping hands kit and place them in the kit's inventory.

Once the holo is placed, you need to insert a metal wire, 16 bolts, 5 metal sheets, 13 planks, laptop, and a card reader. From there you can use a hammer to assemble the table.

You can dismantle the table, built or in holo form, with a hatchet. The "_Perm" bench cannot be dismantled.

Owners can also use the static version (DNA_Workbench_Perm) to place them in remote locations to add some excitement to the process.

To use the bench, you need at very least a 40v batter installed in the battery bay on the top left of the table.

To remove a chip from a bad car, place card in helping hands by looking at them with the card in hand. Now look over at the soldering iron to get the option to remove chip.

To add a new chip, you must place solder and flux in the drawer of the workbench. To open drawer, simply look at top left drawer to get the option. Once open, you can access the inventory. Once you have your chip, solder, and flux inside, you can then look back at the soldering iron to install the new chip.

To program a card, simply place the unprogrammed card into the reader, and look at laptop to get the option.