Reference Cell Source Cartridge - nthallen/keutsch-hcho GitHub Wiki
Materials Needed
Part Number | Vendor | Item Description |
---|---|---|
89895K764 | McMaster | 304 Stainless Steel Tubing, 7/8" OD, 0.049" Wall Thickness |
9446T33 | McMaster | Porous Stainless Steel Disc, 3/4" Diameter, 1/16" Thickness, Removes particles up to 5 microns |
- | DAP | Weldwood Plastic Resin Glue: Powdered, urea-formaldehyde wood glue |
Assembly Instructions
Cut the stainless steel tubing to a 1-1/8" long segment. Powdered Weldwood glue is then added into the cartridge before it's capped by the porous stainless steel discs. The porous discs should fit securely into the ends of the tubing. Do not add water to the Weldwood glue!