FILIF Specs - nthallen/keutsch-hcho GitHub Wiki
Dimensions
The instrument has a floor footprint of 3 ft x 4 ft and is 4 ft high. The footprint for a single ultra zero air cylinder and HCHO (balance N2) gas cylinder is 2 ft x 1 ft.
Power Requirements
On a conservative side, the instrument draws 1000 W of power with the pump taking up about 50% of the total power.
Flow Rate
By default, it's optimal to have a flow rate around 3000-4000 sccm. It can go down to 1000 sccm, but you must make sure that leaks are nearly non-existent.
Required Tubing Size
PFA tubing and PFA Swagelok should be used before the single-pass sample cell. 1/4" Swagelok is used throughout instrument, including the inlet and outlet sizes.