Lab 01 Environment Setup (SYS‐255) - noahcacio/Noah-s GitHub Wiki

The main goal for this lab was to properly create a firewall. We achieved this by going into our fw01 VM and putting in the specified settings for our firewall. After this was done we had to set the IP address for our WAN and LAN servers to ensure we would be getting the proper connections with the right pings. We did this by configuring them in the fw01 VM. The next step was to run our windows VM and create a new local admin account to be used. I did this by going into this PC and adding and altering some of the settings in there to properly set up the account. We then logged into pfsense configured some general information such as the hostname, domain, and Primary DNS. We did this to properly configure the firewall and ensure it was doing what we needed. Overall this lab was very informative and a lot of information for me to take in but I was able to get it done.