rusEFI project Sensors - nmschulte/rusefi GitHub Wiki
Narrow to Wideband approximation
Invert Primary: This setting flips the signal from the primary engine speed sensor.
Invert Secondary: This setting flips the signal from the secondary engine speed sensor.
Cam Sync/VVT input: Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts. TODO #660
Throttle Up switch: Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata
TPS low value detection threshold(%): TPS error detection, what TPS % value is unrealistically low
TPS high value detection threshold(%): TPS error detection, what TPS % value is unrealistically high
Down (WOT) voltage: Pedal in the floor
Measure Map Only In One Cylinder: Useful for individual intakes
Measure Map Only In One Cylinder: Useful for individual intakes
Measure Map Only In One Cylinder: Useful for individual intakes
Is UA input divided?: Is your UA CJ125 output wired to MCU via resistor divider?
Is UR input divided?: Is your UR CJ125 output wired to MCU via resistor divider? Looks like 3v range should be enough, divider generally not needed.
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020
