How to flash M3 tags - nlimper/Mini-AP-v4 GitHub Wiki

In the web interface, go to the flasher tab (lightning icon). Press 'command line'.

Use `OEPL-Flasher.py' (link: https://github.com/jjwbruijn/OpenEPaperLink/tree/master/Tag_Flasher) to flash a tag. For example, to flash an M3 tag with the universal firmware, use:

OEPL-Flasher.py -t 192.168.178.117 -f -n write ..\binaries\Tag\SOL_M3_Uni_full_26.bin

Press the flashing connector firmly on the connector pads of the tag, and hold it steadily in place, just before you activate the command.

You will see the current operation on the screen.

(this guide will be extended in the future)