• NISCOPE_ATTRIBUTE_5V_OUT_OUTPUT_TERMINAL
• NISCOPE_ATTRIBUTE_MASTER_ENABLE
• NISCOPE_ATTRIBUTE_ACQ_ARM_SOURCE
• NISCOPE_ATTRIBUTE_END_OF_ACQUISITION_EVENT_OUTPUT_TERMINAL
• NISCOPE_ATTRIBUTE_END_OF_ACQUISITION_EVENT_TERMINAL_NAME
• NISCOPE_ATTRIBUTE_EXPORTED_START_TRIGGER_OUTPUT_TERMINAL
• NISCOPE_ATTRIBUTE_ARM_REF_TRIG_SRC
• NISCOPE_ATTRIBUTE_EXPORTED_ADVANCE_TRIGGER_OUTPUT_TERMINAL
• NISCOPE_ATTRIBUTE_ADV_TRIG_SRC
• NISCOPE_ATTRIBUTE_ADVANCE_TRIGGER_TERMINAL_NAME
• NISCOPE_ATTRIBUTE_END_OF_RECORD_EVENT_OUTPUT_TERMINAL
• NISCOPE_ATTRIBUTE_END_OF_RECORD_EVENT_TERMINAL_NAME
• NISCOPE_ATTRIBUTE_READY_FOR_ADVANCE_EVENT_OUTPUT_TERMINAL
• NISCOPE_ATTRIBUTE_READY_FOR_ADVANCE_EVENT_TERMINAL_NAME
• NISCOPE_ATTRIBUTE_READY_FOR_START_EVENT_OUTPUT_TERMINAL
• NISCOPE_ATTRIBUTE_READY_FOR_START_EVENT_TERMINAL_NAME
• NISCOPE_ATTRIBUTE_READY_FOR_REF_EVENT_OUTPUT_TERMINAL
• NISCOPE_ATTRIBUTE_READY_FOR_REF_EVENT_TERMINAL_NAME
• NISCOPE_ATTRIBUTE_START_TRIGGER_TERMINAL_NAME

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	None

Specifies the destination for the 5 Volt signal. Refer to the device specifications document for a list of valid destinations.

!Note	Note  This attribute is supported only for NI 5152/5153/5154 devices.

NISCOPE_VAL_RTSI_0	("VAL_RTSI_0")
NISCOPE_VAL_RTSI_1	("VAL_RTSI_1")
NISCOPE_VAL_RTSI_2	("VAL_RTSI_2")
NISCOPE_VAL_RTSI_3	("VAL_RTSI_3")
NISCOPE_VAL_RTSI_4	("VAL_RTSI_4")
NISCOPE_VAL_RTSI_5	("VAL_RTSI_5")
NISCOPE_VAL_RTSI_6	("VAL_RTSI_6")
NISCOPE_VAL_PFI_0	("VAL_PFI_0")
NISCOPE_VAL_PFI_1	("VAL_PFI_1")
NISCOPE_VAL_PFI_2	("VAL_PFI_2")
NISCOPE_VAL_PXI_STAR	("VAL_PXI_STAR")

Data type	Access	Applies to	Coercion	High Level Functions
ViBoolean	R/W	N/A	None	niScope_ConfigureClock

Specifies whether the device is a master or a slave. The master typically originates the trigger signal and clock sync pulse. For a standalone device, set this attribute to VI_FALSE.

VI_TRUE

VI_FALSE

• SMC-Based Digitizers Acquisition Engine State Diagram

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	None

Specifies the source the digitizer monitors for an acquisition arm (Start) trigger. When the acquisition arm trigger is received, the digitizer begins acquiring pretrigger samples.

NISCOPE_VAL_IMMEDIATE

NISCOPE_VAL_RTSI_0

NISCOPE_VAL_RTSI_1

NISCOPE_VAL_RTSI_2

NISCOPE_VAL_RTSI_3

NISCOPE_VAL_RTSI_4

NISCOPE_VAL_RTSI_5

NISCOPE_VAL_RTSI_6

NISCOPE_VAL_PFI_0

NISCOPE_VAL_PFI_1

NISCOPE_VAL_PFI_2

NISCOPE_VAL_PFI_3

NISCOPE_VAL_PFI_4

NISCOPE_VAL_PFI_5

NISCOPE_VAL_PFI_6

NISCOPE_VAL_PFI_7

NISCOPE_VAL_PXI_STAR

NISCOPE_VAL_SW_TRIG_FUNC

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	None

Specifies the destination for the End of Acquisition Event. When this event is asserted, the digitizer has completed sampling for all records. Refer to the device specifications document for a list of valid destinations.

NISCOPE_VAL_RTSI_0	("VAL_RTSI_0")
NISCOPE_VAL_RTSI_1	("VAL_RTSI_1")
NISCOPE_VAL_RTSI_2	("VAL_RTSI_2")
NISCOPE_VAL_RTSI_3	("VAL_RTSI_3")
NISCOPE_VAL_RTSI_4	("VAL_RTSI_4")
NISCOPE_VAL_RTSI_5	("VAL_RTSI_5")
NISCOPE_VAL_RTSI_6	("VAL_RTSI_6")
NISCOPE_VAL_PFI_0	("VAL_PFI_0")
NISCOPE_VAL_PFI_1	("VAL_PFI_1")
NISCOPE_VAL_PFI_2	("VAL_PFI_2")
NISCOPE_VAL_PFI_3	("VAL_PFI_3")
NISCOPE_VAL_PFI_4	("VAL_PFI_4")
NISCOPE_VAL_PFI_5	("VAL_PFI_5")
NISCOPE_VAL_PFI_6	("VAL_PFI_6")
NISCOPE_VAL_PFI_7	("VAL_PFI_7")
NISCOPE_VAL_PXI_STAR	("VAL_PXI_STAR")

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R	N/A	None	N/A

Returns the fully qualified name for the End of Acquisition Event terminal.

You can use this terminal as the source for a trigger.

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	None

Specifies the destination to export the Start trigger. When the Start trigger is received, the digitizer begins acquiring data. Refer to the device specifications document for a list of valid destinations.

NISCOPE_VAL_RTSI_0	("VAL_RTSI_0")
NISCOPE_VAL_RTSI_1	("VAL_RTSI_1")
NISCOPE_VAL_RTSI_2	("VAL_RTSI_2")
NISCOPE_VAL_RTSI_3	("VAL_RTSI_3")
NISCOPE_VAL_RTSI_4	("VAL_RTSI_4")
NISCOPE_VAL_RTSI_5	("VAL_RTSI_5")
NISCOPE_VAL_RTSI_6	("VAL_RTSI_6")
NISCOPE_VAL_PFI_0	("VAL_PFI_0")
NISCOPE_VAL_PFI_1	("VAL_PFI_1")
NISCOPE_VAL_PFI_2	("VAL_PFI_2")
NISCOPE_VAL_PXI_STAR	("VAL_PXI_STAR")

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	None

Specifies the source the digitizer monitors for an arm reference trigger. When the arm reference trigger is received, the digitizer begins looking for a Reference (Stop) trigger from the user-configured trigger source.

NISCOPE_VAL_IMMEDIATE

NISCOPE_VAL_PXI_STAR

NISCOPE_VAL_SW_TRIG_FUNC

NISCOPE_VAL_RTSI_0

NISCOPE_VAL_RTSI_1

NISCOPE_VAL_RTSI_2

NISCOPE_VAL_RTSI_3

NISCOPE_VAL_RTSI_4

NISCOPE_VAL_RTSI_5

NISCOPE_VAL_RTSI_6

NISCOPE_VAL_PFI_0

NISCOPE_VAL_PFI_1

NISCOPE_VAL_PFI_2

NISCOPE_VAL_PFI_3

NISCOPE_VAL_PFI_4

NISCOPE_VAL_PFI_5

NISCOPE_VAL_PFI_6

NISCOPE_VAL_PFI_7

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	None

Specifies the destination for the advance trigger. When the advance trigger is received, the digitizer begins acquiring pretrigger samples.

Refer to the NI High-Speed Digitizers Help for a specific list of valid destinations for your device.

NISCOPE_VAL_RTSI_0	("VAL_RTSI_0")
NISCOPE_VAL_RTSI_1	("VAL_RTSI_1")
NISCOPE_VAL_RTSI_2	("VAL_RTSI_2")
NISCOPE_VAL_RTSI_3	("VAL_RTSI_3")
NISCOPE_VAL_RTSI_4	("VAL_RTSI_4")
NISCOPE_VAL_RTSI_5	("VAL_RTSI_5")
NISCOPE_VAL_RTSI_6	("VAL_RTSI_6")
NISCOPE_VAL_PFI_0	("VAL_PFI_0")
NISCOPE_VAL_PFI_1	("VAL_PFI_1")
NISCOPE_VAL_PFI_2	("VAL_PFI_2")
NISCOPE_VAL_PFI_3	("VAL_PFI_3")
NISCOPE_VAL_PFI_4	("VAL_PFI_4")
NISCOPE_VAL_PFI_5	("VAL_PFI_5")
NISCOPE_VAL_PFI_6	("VAL_PFI_6")
NISCOPE_VAL_PFI_7	("VAL_PFI_7")
NISCOPE_VAL_PXI_STAR	("VAL_PXI_STAR")

Datatype	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	None

Specifies the source the digitizer monitors for an advance trigger. When the advance trigger is received, the digitizer begins acquiring pretrigger samples.

NISCOPE_VAL_IMMEDIATE

NISCOPE_VAL_PXI_STAR

NISCOPE_VAL_SW_TRIG_FUNC

NISCOPE_VAL_RTSI_0

NISCOPE_VAL_RTSI_1

NISCOPE_VAL_RTSI_2

NISCOPE_VAL_RTSI_3

NISCOPE_VAL_RTSI_4

NISCOPE_VAL_RTSI_5

NISCOPE_VAL_RTSI_6

NISCOPE_VAL_PFI_0

NISCOPE_VAL_PFI_1

NISCOPE_VAL_PFI_2

NISCOPE_VAL_PFI_3

NISCOPE_VAL_PFI_4

NISCOPE_VAL_PFI_5

NISCOPE_VAL_PFI_6

NISCOPE_VAL_PFI_7

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R	N/A	None	N/A

Returns the fully qualified name for the Advance Trigger terminal.

You can use this terminal as the source for a trigger.

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	None

Specifies the destination for the End of Record Event. When this event is asserted, the digitizer has completed sampling for the current record. Refer to the device specifications document for a list of valid destinations.

NISCOPE_VAL_RTSI_0	("VAL_RTSI_0")
NISCOPE_VAL_RTSI_1	("VAL_RTSI_1")
NISCOPE_VAL_RTSI_2	("VAL_RTSI_2")
NISCOPE_VAL_RTSI_3	("VAL_RTSI_3")
NISCOPE_VAL_RTSI_4	("VAL_RTSI_4")
NISCOPE_VAL_RTSI_5	("VAL_RTSI_5")
NISCOPE_VAL_RTSI_6	("VAL_RTSI_6")
NISCOPE_VAL_PFI_0	("VAL_PFI_0")
NISCOPE_VAL_PFI_1	("VAL_PFI_1")
NISCOPE_VAL_PFI_2	("VAL_PFI_2")
NISCOPE_VAL_PFI_3	("VAL_PFI_3")
NISCOPE_VAL_PFI_4	("VAL_PFI_4")
NISCOPE_VAL_PFI_5	("VAL_PFI_5")
NISCOPE_VAL_PFI_6	("VAL_PFI_6")
NISCOPE_VAL_PFI_7	("VAL_PFI_7")
NISCOPE_VAL_PXI_STAR	("VAL_PXI_STAR")

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R	N/A	None	N/A

Returns the fully qualified name for the End of Record Event terminal.

You can use this terminal as the source for a trigger.

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	niScope_ExportSignal

Specifies the destination for the Ready for Advance Event. When this event is asserted, the digitizer is ready to receive an advance trigger.

Refer to the device-specific documentation in the NI High-Speed Digitizers Help for a list of valid destinations for your device.

NISCOPE_VAL_RTSI_0	("VAL_RTSI_0")
NISCOPE_VAL_RTSI_1	("VAL_RTSI_1")
NISCOPE_VAL_RTSI_2	("VAL_RTSI_2")
NISCOPE_VAL_RTSI_3	("VAL_RTSI_3")
NISCOPE_VAL_RTSI_4	("VAL_RTSI_4")
NISCOPE_VAL_RTSI_5	("VAL_RTSI_5")
NISCOPE_VAL_RTSI_6	("VAL_RTSI_6")
NISCOPE_VAL_PFI_0	("VAL_PFI_0")
NISCOPE_VAL_PFI_1	("VAL_PFI_1")
NISCOPE_VAL_PFI_2	("VAL_PFI_2")
NISCOPE_VAL_PXI_STAR	("VAL_PXI_STAR")

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R	N/A	None	N/A

Returns the fully qualified name for the Ready for Advance Event terminal.

You can use this terminal as the source for a trigger.

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	niScope_ExportSignal

Specifies the destination for the Ready for Start Event. When this event is asserted, the digitizer is ready to receive a start trigger.

Refer to the NI High-Speed Digitizers Help for a specific list of valid destinations for your device.

NISCOPE_VAL_RTSI_0	("VAL_RTSI_0")
NISCOPE_VAL_RTSI_1	("VAL_RTSI_1")
NISCOPE_VAL_RTSI_2	("VAL_RTSI_2")
NISCOPE_VAL_RTSI_3	("VAL_RTSI_3")
NISCOPE_VAL_RTSI_4	("VAL_RTSI_4")
NISCOPE_VAL_RTSI_5	("VAL_RTSI_5")
NISCOPE_VAL_RTSI_6	("VAL_RTSI_6")
NISCOPE_VAL_PFI_0	("VAL_PFI_0")
NISCOPE_VAL_PFI_1	("VAL_PFI_1")
NISCOPE_VAL_PFI_2	("VAL_PFI_2")
NISCOPE_VAL_PFI_3	("VAL_PFI_3")
NISCOPE_VAL_PFI_4	("VAL_PFI_4")
NISCOPE_VAL_PFI_5	("VAL_PFI_5")
NISCOPE_VAL_PFI_6	("VAL_PFI_6")
NISCOPE_VAL_PFI_7	("VAL_PFI_7")
NISCOPE_VAL_PXI_STAR	("VAL_PXI_STAR")

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R	N/A	None	N/A

Returns the fully qualified name for the Ready for Start Event terminal.

You can use this terminal as the source for a trigger.

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R/W	N/A	None	niScope_ExportSignal

Specifies the destination for the Ready for Reference Event. When this event is asserted, the digitizer is ready to receive a reference trigger.

NISCOPE_VAL_RTSI_0	("VAL_RTSI_0")
NISCOPE_VAL_RTSI_1	("VAL_RTSI_1")
NISCOPE_VAL_RTSI_2	("VAL_RTSI_2")
NISCOPE_VAL_RTSI_3	("VAL_RTSI_3")
NISCOPE_VAL_RTSI_4	("VAL_RTSI_4")
NISCOPE_VAL_RTSI_5	("VAL_RTSI_5")
NISCOPE_VAL_RTSI_6	("VAL_RTSI_6")
NISCOPE_VAL_PFI_0	("VAL_PFI_0")
NISCOPE_VAL_PFI_1	("VAL_PFI_1")
NISCOPE_VAL_PFI_2	("VAL_PFI_2")
NISCOPE_VAL_PXI_STAR	("VAL_PXI_STAR")

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R	N/A	None	N/A

Returns the fully qualified name for the Ready for Reference Event terminal.

You can use this terminal as the source for a trigger.

Data type	Access	Applies to	Coercion	High Level Functions
ViString	R	N/A	None	N/A

Returns the fully qualified name for the Start Trigger terminal.

You can use this terminal as the source for a trigger.