• RFmxLTE_SlotPowerCfgMeasurementInterval

int32 __stdcall RFmxLTE_SlotPowerCfgMeasurementInterval (niRFmxInstrHandle instrumentHandle, char selectorString[], int32 measurementOffset, int32 measurementLength);

Configures the measurementOffset and measurementLength parameters of SlotPower measurement.

Input
Name	Type	Description
instrumentHandle	niRFmxInstrHandle	Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString	char[]	Specifies a selector string) comprising of the signal name. If you do not specify the signal name, the default signal instance is used. Example: "signal::sig1" You can use the RFmxLTE_BuildSignalString) function to build the selector string.
measurementOffset	int32	Specifies the measurement offset to skip from the frame boundary or the marker (external trigger) location. This value is expressed in subframes.
measurementLength	int32	Specifies the number of subframes to be measured. This value is expressed in subframes.

Name	Type	Description
status	int32	Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function. The general meaning of the status code is as follows:

Value	Meaning
0	Success
Positive Values	Warnings
Negative Values	Errors