• NI 5665/5667/5668R
  • NIRFSA_ATTR_DOWNCONVERTER_CAL_TONE_MODE
  • NIRFSA_ATTR_DOWNCONVERTER_CAL_TONE_FREQUENCY
• NI 5665/5668R
  • NIRFSA_ATTR_CALIBRATION_CORRECTION_THROUGH_FILTER
  • NIRFSA_ATTR_CALIBRATION_CORRECTION_300_KHZ_FILTER
  • NIRFSA_ATTR_CALIBRATION_CORRECTION_5_MHZ_FILTER
  • NIRFSA_ATTR_CALIBRATION_CORRECTION_100_MHZ_FILTER
  • NIRFSA_ATTR_CALIBRATION_CORRECTION_320_MHZ_FILTER
  • NIRFSA_ATTR_CALIBRATION_CORRECTION_765_MHZ_FILTER
• NI 5693
  • NIRFSA_ATTR_RF_CONDITIONING_CAL_TONE_MODE
  • NIRFSA_ATTR_RF_CONDITIONING_CAL_TONE_FREQUENCY

Data type	Access	High Level Functions
ViInt32	R/W	None

Specifies the location in a signal path where an RF downconverter calibration tone is injected or whether the tone is disabled.

Refer to PXIe-5665 Theory of Operation, PXIe-5667 Block Diagram, or PXIe-5668 Block Diagram for more information about signal paths for your device.

Defined and Valid Values:

Value	Description	Valid For
NIRFSA_VAL_CAL_TONE_DISABLED (2700)	Disables the calibration tone for the associated signal path.	PXIe-5603/5605/5606
NIRFSA_VAL_CAL_TONE_LOWBAND_RF (2701)	Injects the calibration tone into the low band RF signal path.	PXIe-5603/5605/5606
NIRFSA_VAL_CAL_TONE_HIGHBAND_RF (2702)	Injects the calibration tone into the high band RF signal path.	PXIe-5605/5606
NIRFSA_VAL_CAL_TONE_HIGHBAND_IF (2703)	Injects the calibration tone into the high band IF signal path.	PXIe-5605
NIRFSA_VAL_CAL_TONE_LOWBAND_WITHOUT_ALC (2704)	Injects the calibration tone into the low band RF signal path, bypassing the ALC.	PXIe-5606
NIRFSA_VAL_CAL_TONE_COMB_GENERATOR (2705)	Injects the calibration tone into the high band RF signal path through the Comb Generator.	PXIe-5606
Default Value: NIRFSA_VAL_CAL_TONE_DISABLED

Supported Devices: PXIe-5603/5605/5606 (external digitizer mode), PXIe-5665/5667/5668

Data type	Access	High Level Functions
ViReal64	R/W	None

Specifies the frequency of the RF downconverter calibration tone, in hertz (Hz).

Valid Values

PXIe-5603/5605—134 MHz to 13.2 GHz

PXIe-5606—34.5 MHz to 4 GHz

Default Value: 612.5 MHz

Supported Devices: PXIe-5603/5605/5606 (external digitizer mode), PXIe-5665/5667/5668

Data type	Access	High Level Functions
ViReal64	R/W	None

Specifies the internal gain self-calibration correction for the IF filter through path. The value you specify using this attribute overrides any previously-set value.

Units: dB

Default Value: 0

Supported Devices: PXIe-5603/5605

Data type	Access	High Level Functions
ViReal64	R/W	None

Specifies the internal gain self-calibration correction for the 300 kHz IF filter path. The value you specify using this attribute overrides any previously-set value.

Units: dB

Default Value: 0

Supported Devices: PXIe-5603/5605/5606

Data type	Access	High Level Functions
ViReal64	R/W	None

Specifies the internal gain self-calibration correction for the 5 MHz IF filter path. The value you specify using this attribute overrides any previously-set value.

Units: dB

Default Value: 0

Supported Devices: PXIe-5603/5605/5606

Data type	Access	High Level Functions
ViReal64	R/W	None

Specifies the internal gain self-calibration correction for the 100 MHz IF filter path. The value you specify using this attribute overrides any previously-set value.

Units: dB

Default Value: 0

Supported Devices: PXIe-5606

Data type	Access	High Level Functions
ViReal64	R/W	None

Specifies the internal gain self-calibration correction for the 320 MHz IF filter path. The value you specify using this attribute overrides any previously-set value.

Units: dB

Default Value: 0

Supported Devices: PXIe-5606

Data type	Access	High Level Functions
ViReal64	R/W	None

Specifies the internal gain self-calibration correction for the 765 MHz IF filter path. The value you specify using this attribute overrides any previously-set value.

Units: dB

Default Value: 0

Supported Devices: PXIe-5606

Data type	Access	High Level Functions
ViInt32	R/W	None

Specifies the location in a signal path where an RF conditioning calibration tone is injected or whether the tone is disabled.

Defined Values:

NIRFSA_VAL_CAL_TONE_DISABLED (2700)	Disables the calibration tone for the associated signal path.
NIRFSA_VAL_CAL_TONE_LOWBAND_RF (2701)	Injects the calibration tone into the low band RF signal path.
NIRFSA_VAL_CAL_TONE_HIGHBAND_RF (2702)	Injects the calibration tone into the high band RF signal path.
Default Value: NIRFSA_VAL_CAL_TONE_DISABLED

Supported Devices: PXIe-5667, PXIe-5693/5698

Data type	Access	High Level Functions
ViReal64	R/W	None

Specifies the frequency of the RF conditioning calibration tone, in hertz (Hz).

Valid Values: 34.5 MHz to 7.5 GHz

Default Value: 1.0 GHz

Supported Devices: PXIe-5667, PXIe-5693/5698