• NIDIGITAL_ATTRIBUTE_START_TRIGGER_TYPE
• NIDIGITAL_ATTRIBUTE_DIGITAL_EDGE_START_TRIGGER_SOURCE
• NIDIGITAL_ATTRIBUTE_DIGITAL_EDGE_START_TRIGGER_EDGE
• NIDIGITAL_ATTRIBUTE_EXPORTED_START_TRIGGER_OUTPUT_TERMINAL
• NIDIGITAL_ATTRIBUTE_CONDITIONAL_JUMP_TRIGGER_TYPE
• NIDIGITAL_ATTRIBUTE_DIGITAL_EDGE_CONDITIONAL_JUMP_TRIGGER_SOURCE
• NIDIGITAL_ATTRIBUTE_DIGITAL_EDGE_CONDITIONAL_JUMP_TRIGGER_EDGE
• NIDIGITAL_ATTRIBUTE_EXPORTED_CONDITIONAL_JUMP_TRIGGER_OUTPUT_TERMINAL
• NIDIGITAL_ATTRIBUTE_CONDITIONAL_JUMP_TRIGGER_TERMINAL_NAME

Numeric Value	1150029
Datatype	ViInt32
Access	R/W
Applies to	N/A
Coercion	None
High-level Functions	niDigital_ConfigureDigitalEdgeStartTrigger niDigital_ConfigureSoftwareEdgeStartTrigger niDigital_DisableStartTrigger

Specifies the Start trigger type.

The digital pattern instrument waits for this trigger after you call the niDigital_init function or the niDigital_BurstPattern function, and does not burst a pattern until this trigger is received.

Defined Values:
NIDIGITAL_VAL_NONE (1700)	Disables the Start trigger. Pattern bursting starts immediately after you call the niDigital_init function or the niDigital_BurstPattern function.
NIDIGITAL_VAL_DIGITAL_EDGE (1701)	Pattern bursting does not start until the digital pattern instrument detects a digital edge.
NIDIGITAL_VAL_SOFTWARE (1702)	Pattern bursting does not start until the digital pattern instrument receives a software Start trigger. Create a software Start trigger by calling the niDigital_SendSoftwareEdgeTrigger function and selecting start trigger in the trigger parameter.Related information: SendSoftwareEdgeTrigger function.

Numeric Value	1150030
Datatype	ViString
Access	R/W
Applies to	N/A
Coercion	None
High-level Functions	niDigital_ConfigureDigitalEdgeStartTrigger

Specifies the source terminal for the Start trigger. This property is used when the NIDIGITAL_ATTRIBUTE_START_TRIGGER_TYPE attribute is set to Digital Edge.

You can specify source terminals in one of two ways. If the digital pattern instrument is named Dev1 and your terminal is PXI_Trig0, you can specify the terminal with the fully qualified terminal name, /Dev1/PXI_Trig0, or with the shortened terminal name, PXI_Trig0. The source terminal can also be a terminal from another device, in which case the NI-Digital Pattern Driver automatically finds a route (if one is available) from that terminal to the input terminal (going through a physical PXI backplane trigger line). For example, you can set the source terminal on Dev1 to be /Dev2/StartTrigger.

Defined Values:
PXI_Trig0	PXI trigger line 0
PXI_Trig1	PXI trigger line 1
PXI_Trig2	PXI trigger line 2
PXI_Trig3	PXI trigger line 3
PXI_Trig4	PXI trigger line 4
PXI_Trig5	PXI trigger line 5
PXI_Trig6	PXI trigger line 6
PXI_Trig7	PXI trigger line 7

Note These defined values are currently not supported for gRPC, instead pass the raw values specified alongside, directly.

Numeric Value	1150031
Datatype	ViInt32
Access	R/W
Applies to	N/A
Coercion	None
High-level Functions	niDigital_ConfigureDigitalEdgeStartTrigger

Specifies the active edge for the Start trigger. This property is used when the NIDIGITAL_ATTRIBUTE_START_TRIGGER_TYPE attribute is set to Digital Edge.

Defined Values:
NIDIGITAL_VAL_RISING_EDGE (1800)	Asserts the trigger when the signal transitions from low level to high level.
NIDIGITAL_VAL_FALLING_EDGE (1801)	Asserts the trigger when the signal transitions from high level to low level.

Numeric Value	1150032
Datatype	ViString
Access	R/W
Applies to	N/A
Coercion	None
High-level Functions	niDigital_ExportSignal

Specifies the destination terminal for exporting the Start trigger.

Terminals can be specified in one of two ways. If the digital pattern instrument is named Dev1 and your terminal is PXI_Trig0, you can specify the terminal with the fully qualified terminal name, /Dev1/PXI_Trig0, or with the shortened terminal name, PXI_Trig0.

Defined Values:
Do not export signal	The signal is not exported.
PXI_Trig0	PXI trigger line 0
PXI_Trig1	PXI trigger line 1
PXI_Trig2	PXI trigger line 2
PXI_Trig3	PXI trigger line 3
PXI_Trig4	PXI trigger line 4
PXI_Trig5	PXI trigger line 5
PXI_Trig6	PXI trigger line 6
PXI_Trig7	PXI trigger line 7

Note These defined values are currently not supported for gRPC, instead pass the raw values specified alongside, directly.

Numeric Value	1150033
Datatype	ViInt32
Access	R/W
Applies to	Conditional Jump Trigger instance
Coercion	No
High-level Functions	niDigital_ConfigureDigitalEdgeConditionalJumpTrigger niDigital_ConfigureSoftwareEdgeConditionalJumpTrigger niDigital_DisableConditionalJumpTrigger

Disables the conditional jump trigger or configures it for either hardware triggering or software triggering.

Valid Values:
NIDIGITAL_VAL_NONE (1700)	Disables the conditional jump trigger.
NIDIGITAL_VAL_DIGITAL_EDGE (1701)	Configures the conditional jump trigger for hardware triggering.
NIDIGITAL_VAL_SOFTWARE (1702)	Configures the conditional jump trigger for software triggering.

Default Value:
NIDIGITAL_VAL_NONE (1700)

Numeric Value	1150034
Datatype	ViString
Access	R/W
Applies to	Conditional Jump Trigger instance
Coercion	No
High-level Functions	niDigital_ConfigureDigitalEdgeConditionalJumpTrigger

Configures the digital trigger source terminal for a conditional jump trigger instance. The PXIe-6570/6571 supports triggering through the PXI trigger bus.

You can specify source terminals in one of two ways. If the digital pattern instrument is named Dev1 and your terminal is PXI_Trig0, you can specify the terminal with the fully qualified terminal name, /Dev1/PXI_Trig0, or with the shortened terminal name, PXI_Trig0. The source terminal can also be a terminal from another device, in which case the NI-Digital Pattern Driver automatically finds a route (if one is available) from that terminal to the input terminal (going through a physical PXI backplane trigger line). For example, you can set the source terminal on Dev1 to be /Dev2/ConditionalJumpTrigger0.

Valid Values:
String identifier to any valid terminal name

Default Value:
VI_NULL ("")	Returns an empty string.

Numeric Value	1150035
Datatype	ViInt32
Access	R/W
Applies to	Conditional Jump Trigger instance
Coercion	No
High-level Functions	niDigital_ConfigureDigitalEdgeConditionalJumpTrigger

Configures the active edge of the incoming trigger signal for the conditional jump trigger instance.

Valid Values:
NIDIGITAL_VAL_RISING_EDGE (1800)	Specifies the signal transition from low level to high level.
NIDIGITAL_VAL_FALLING_EDGE (1801)	Specifies the signal transition from high level to low level.

Default Value:
NIDIGITAL_VAL_RISING_EDGE (1800)

Numeric Value	1150036
Datatype	ViString
Access	R/W
Applies to	Conditional Jump Trigger instance
Coercion	No
High-level Functions	niDigital_ExportSignal

Specifies the terminal to output the exported signal of the specified instance of the conditional jump trigger.

Valid Values:
VI_NULL ("")	Returns an empty string
PXI_Trig0	PXI trigger line 0
PXI_Trig1	PXI trigger line 1
PXI_Trig2	PXI trigger line 2
PXI_Trig3	PXI trigger line 3
PXI_Trig4	PXI trigger line 4
PXI_Trig5	PXI trigger line 5
PXI_Trig6	PXI trigger line 6
PXI_Trig7	PXI trigger line 7

Note These defined values are currently not supported for gRPC, instead pass the raw values specified alongside, directly.

Default Value:
VI_NULL ("")

Numeric Value	1150040
Datatype	ViString
Access	R
Applies to	Conditional Jump Trigger instance
Coercion	No
High-level Functions	N/A

Specifies the terminal name from which the exported conditional jump trigger signal may be routed to other instruments through the PXI trigger bus. You can use this signal to trigger other instruments when the conditional jump trigger instance asserts on the digital pattern instrument.