Setting up the GL‐iNet AX1800 - nestrischamps/nestrischamps GitHub Wiki

  1. Switch on the router and connect your computer to one of the LAN ports

  2. Visit the url http://192.168.8.1/

  3. Set up a language and admin password (remember it!)

  4. Activate repeater mode in the router and select a wifi network image

  5. Upgrade the router firmware image

  6. Turn off wifi support on the router (this might disconnect the repeater for a bit don't panic, that's fine) image

  7. Reserve an IP for the nestrischamps server to its current value, so it never changes image image image image

  8. If you are not using wired internet, change the wan port to become another lan port image