Command References

TS590 CAT Command Reference http://www.kenwood.com/i/products/info/amateur/pdf/ts590_g_pc_command_e_rev2.pdf

TS990S Command Reference http://www.kenwood.com/i/products/info/amateur/pdf/ts990_pc_command_e_rev1.pdf

Command Specific Information

General Info about the KY command (to send CW)

`Parameters: P1`
`0: Character buffer is available`
`1: Character buffer is not available`
`(Answer command only. A space must be used for the Set command.)`
`P2`
`Enter characters and numbers.`
`Available characters are: ABCDEFGHIJKLMNOPQRSTUVWXYZ “ ” (space) 0123456789 "'()*+,–./:=?`
`Special characters:`
`The following ASCII characters can be used in place of the special CW codes.`
  `BT=[, AR=_, AS=<, HH=#, SK=>, KN=], BK=\, SN=%`
`The fixed 24-byte length is used for the P2 parameter.`
`“ ” (space) character must be used for the unused characters. These space characters will not be converted.`
`If all P2 parameter characters are spaces, the transceiver stops sending the message.`