If you have the stock icons and display assets you don't need to update the display to use this Ender3v2 firmware.

Display firmware, boot image and icons compilations

This page list the display assets compilations compatible with MRISCOC's firmware fork.

How to install

1. Get an µSD card of 8GB or less.
2. Format the µSD card MBR, FAT32 and with a 4 KB sector size
3. Copy the DWIN_SET directory in the Root of SD
4. Turn off your printer
5. Disconnect and disassembly the screen unit
6. Install the µSD card into the slot of the screen unit
7. Reconnect the screen to the printer
8. Turn on the printer and wait for the display to change color from blue to orange
9. Verify that the screen assets were updated
10. Turn off the printer and remove the µSD card from the screen unit
11. Reassembly the screen unit

If you want to change only the icons, then you can leave only the 9.ICO file inside of the DWIN_SET folder.
If you weren't able to update the display, verify the format of the µSD Card (MBR, FAT32 and allocation unit of 4096 bytes) and the CRC of the files.

Be sure to leave only the DWIN_SET folder at the root of the card.

---

Stock display firmware

---

Giadej compilation

---

Updating printer firmware

For update your printer firmware and get the latest version go here: https://github.com/mriscoc/Marlin_Ender3v2/releases/latest