Windows instalation guide - moonglow/FlashForge_Marlin GitHub Wiki

FF Firmware writer is most easiest way to write Marlin or back to original firmware.

ff_writer

  1. Make sure what you have FlashPrint installed and it works with your printer ( FlashPrint must not be runned during update process )
  2. FlashPrint installer will also install device drivers needed by my tool, but you can do it manually, default driver location is here: X:\Program Files\FlashForge\FlashPrint\driver\
  3. Download and unpack ff_fwriter_06_01_2022.zip
  4. Put your firmware to the same folder with ff_flasher and try to avoid non english letters in file paths
  5. Choose your firmware with OPEN button
  6. Push START button ( printer waiting time 30 second )
  7. Turn on your printer
  8. Update process will start automatically

Tool will await for USB bootloader ( it will appear shortly while FlashForge logo ) with VID = 0x0315 and PID 0x0001/0x0005/0x000A