[TOC]

DJ:

• Mixer Master L - Xilical Input 1 (XLR)
• Mixer Master R - Xilical Input 2 (XLR)
• Mixer Booth L - Monitor TX1 Links (evtl Adapter chinch-xlr)
• Mixer Booth R - Monitor TX1 Rechts (evtl Adapter chinch-xlr)

Sub:

• Xilica Output 1 - Camco Channel A In (XLR)
• Camco Channel A Out - Sub DH18 (Speakon)

Tops:

• Xilica Output 3 - Top TX2 Links (XLR)
• Xilica Output 4 - Top TX2 Rechts (XLR)

1. Camco Verstaerker ausschalten, Regler auf linksanschlag drehen
2. Tops ausschalten, Regler auf linksanschlag drehen
3. Verkabeln
4. Xilica Controller einschalten
5. Preset 2xTX2+1xDH18 sollte geladen sein
6. Alle MUTE Tasten müssen rot leuchten
7. CD spielen, DJ Mixer Master muss Signal liefern (0db)
8. Controller Input Mute auf Kanal 1 & 2 ausschalten, Signalanzeige sollte blinken
9. Controller Output Mute Kanal 1 (Sub) ausschalten, Signalanzeige sollte blinken
10. Controller Output Mute Kanal 3 & 4 (Tops) ausschalten, Signalanzeige sollte blinken
11. Tops einschalten, Preset 3 auswählen, Lautstärkeregler langsam aufdrehen
12. Camco Amp einschalten, Lautstärkeregler Channel a langsam aufdrehen

1. Stereo Inputs: Input 1 & 2
2. Mono Sub Output: Output 1
3. Stereo Top Outputs: Output 3 & 4

Manual

Website

• Preset Mode 1 – Fullrange 60Hz
• Preset Mode 2 – Fullrange 70Hz
• Preset Mode 3 – Crossover Mode 100Hz
• Preset Mode 4 – Floor Monitor 60Hz

System	High power 2-way fullrange top
Configuration	1 x 12" high excursion 3" VC driver1 x HF-compression driver with 1.75" VC polyester diaphragm
Electronics	800W + 200W RMS amping power
Signal Processor	24bit ADC/DAC, 48kHz sample rate
Frequency Respose	65 – 20,000Hz (+/- 3dB)
Coverage Angle	80° horizontal x 55° vertical
Monitor Angle	46° / 66°
Crossover Frequency	1400Hz
Sensitivity	96dB / 1W / 1m – info
Connection	XLR in / out, Powercon in / out
Setup Configuration	Setups
Further Information	FAQs
Enclosure	Rigid braced construction of special 12mm lightweight-wood
Finish	High density polyurethane-coatingBlack
Front Cover	Weather-resistant front fabric on coated 1.5mm perforated steel
Width	14.3" (362 mm)
Height	23.7" (603 mm)
Depth	15.1" (384 mm)
Weight	38.4 lbs (16.5 kg)

Website

• Preset Mode 1 – Fullrange 60Hz
• Preset Mode 2 – Fullrange 70Hz
• Preset Mode 3 – Crossover Mode 100Hz
• Preset Mode 4 – Floor Monitor 60Hz

System	High power 2-way fullrange top
Configuration	1 x 10" high excursion 3" VC driver1 x HF-compression driver with polyester 1.75" VC diaphragm
Electronics	800W + 200W RMS amping power
Signal Processor	24bit ADC/DAC, 48kHz sample rate
Frequency Respose	70 – 20,000Hz (+/- 3dB)
Coverage Angle	80° horizontal x 55° vertical
Monitor Angle	46° / 66°
Crossover Frequency	1400Hz
Sensitivity	96dB / 1W / 1m – info
Connection	XLR in / out, Powercon in / out
Setup Configuration	Setups
Further Information	FAQs
Enclosure	Rigid braced construction of special 12mm lightweight-wood
Finish	High density polyurethane-coatingBlack
Front Cover	Weather-resistant front fabric on coated 1.5mm perforated steel
Width	12.8" (324 mm)
Height	21.3" (541 mm)
Depth	13.3" (339 mm)
Weight	34.8 lbs (15.4 kg)

Website

System	Extreme high power subbass with Digitalhorn technology
Configuration	1 x 18" ultra long excursion driverwith 5.3" VC as well as glass fiber and epoxy reinforced coneAluminium demodulation rings
Power Handling	3600W RMS amping power
Frequency Respose	S-Mode: 28–110Hz (+/- 3dB)D-Mode: 30–120Hz (+/- 3dB)
Sensitivity	S-Mode: 102dB / 1W / 1mD-Mode: 104dB / 1W / 1minfo
Connection	2x Neutrik NL4 Speakon
Impedance	4Ω
Further Information	FAQs
Enclosure	Rigid braced construction of special 15mm lightweight-wood
Finish	High density polyurethane-coatingBlack
Front Cover	Coated perforated 2mm steel with subjacent micro-meshed fabric
Width	22.9" (582 mm)
Height	37.9" (962 mm)
Depth	37.9" (962 mm)
Weight	137.8 lbs (58.5 kg)