Construction tips and tricks

Physically wiring the sensors together, into a suitable enclosure, is always a little tricky. There is no right or wrong way, but here are some tips and tricks.

This is a Draft - I am still working on it.

Notes to include

• 4k7 on DS18B20
• Voltage divider on battery sensors
• Short headers
• Multi-layer heat shrink
• staggered junctions
• Tool for wires
• Velcro straps around battery
• The new XH connectors I just found (if they work well)
• Foam to pack
• Velcro ties
• A collection of images I plan on writing about ...

Enclosures

There are two kinds of enclosures I've used. The first are small ABS boxes. I typically use this store but suitable boxes should be available locally,

Things to look for

• fixing flange so it can be screwed or hung or ziptied easier
• screws in 4 corners to ensure fits tightly on cables in notches (this is less common)

Alternatively, I use 40mm PVC pipe, with end caps. These should be available locally.

Cables in boxes

• Bring cables out next to screws if box only screwed diagonal

Cables and pipes