CISCO Token‐Ring Networking - mikerm19/cisco GitHub Wiki
CISCO Token-Ring Networking
The following configs assume this network layout. This particular setup was chosen because my home network is like this, and most home networks will be very similar. Rarely are you going to replace your home router with the CISCO you're playing with. There are a million ways to set up a network though, so YMMV.
These configurations were created on a CISCO 3725 with a NM-1FE1R2W module, using the two onboard ports on the module (TokenRing 1/0 and FastEthernet 1/0). You can use any ethernet interface though.
Routing
- Basic IP Routing - Easiest, has some flaws
- NAT Between - A little more configuration, but works really well (and my favorite)
- VLAN Routing
Bridging