LAN Lab - michael-D-S/NET-150 GitHub Wiki
Michael Sargent 4/10/24 NET-150 LAN Lab
Tech Journal:
-begin by accessing the WR Router, then navigate to the GUI and change the Internet type from Automatic to Static. -The fill in the IP, Subnet Mask, and Default Gateway fields according to the chart.
- For the network setting input the IP address and enable the DHCP Server. -save setting at bottom of page. -Open the wireless section and set network mode to Wireless-N Only, and disable the SSID broadcast.
Enable WPA2-Personal security in wireless security tab Create a passphrase and save settings.
Using Laptop 1 enter the wireless PC tabs in desktop, in Advanced setup leave infrastructure mode enabled, create a new profile named Wireless Access, Set the SSID to be the same as the WR, leave the DHCP setting alone, Sets security to match the WR and enter the passphrase and save. Ensure connectivity.
Repeat with PC’s 2 and 3. Setup the Wired Router with the proper information to connect to both the Server and the Wireless Router and connect them using Crossover Cables. Ensure that both the Server and the Wireless server are properly configured according to the table. Ensure that the laptops can connect to the web server.