Mystery 1.8" TFT LCD 128 * 160

1.8 inch

Features

• Size 1.8 inches
• Display mode A-TFT
• Display Format Graphic 128RGB * 160 Dot Matrix
• Input data SPI interface
• IC ST7735S actuator datasheet
• Measuring contour 35 (W) * 56 (H) * 3.45 +/- 0.1 (T) mm
• Resolution 128RGB * 160 dots
• LCD active area 28.03 (W) * 35.04 (H)
• Pixel Size 0.219 (W) * 0.219 (H)
• Viewing direction 12 o'clock
• Working temperature -20 ~ 70 ° C

Pin Description - Pin number Symbol Description

• 1, GND Ground
• 2, VCC Power 3.3V, No 5V support.
• 3, SCL Serial Clock pin, input.
• 4, SDA Serial Data pin, input.
• 5, RES Reset pin LCM - This pin is a reset signal input. When the pin is low, the chip reset is performed. Keep this pin high during normal operation.
• 6, DC Data/Command control
• 7, CS Chip Select
• 8, BLK Backlight, pull high to turn on. Use logic-level or PWM. This is not analog input. It connects to the base of an NPN transistor for turning on or off the backlight LEDs.