Creates a ruled surface as a bevel between two input surface edges.

Namespace: Rhino.Geometry
Assembly: RhinoCommon (in RhinoCommon.dll) Version: Rhino 6.0

C#

public static Brep[] CreateChamferSurface(
	BrepFace face0,
	Point2d uv0,
	double radius0,
	BrepFace face1,
	Point2d uv1,
	double radius1,
	bool trim,
	bool extend,
	double tolerance,
	out Brep[] outBreps0,
	out Brep[] outBreps1
)

VB

Public Shared Function CreateChamferSurface ( 
	face0 As BrepFace,
	uv0 As Point2d,
	radius0 As Double,
	face1 As BrepFace,
	uv1 As Point2d,
	radius1 As Double,
	trim As Boolean,
	extend As Boolean,
	tolerance As Double,
	<OutAttribute> ByRef outBreps0 As Brep(),
	<OutAttribute> ByRef outBreps1 As Brep()
) As Brep()

face0

Type: Rhino.Geometry.BrepFace
First face to chamfer from.

uv0

Type: Rhino.Geometry.Point2d
A parameter face0 at the side you want to keep after chamfering.

radius0

Type: System.Double
The distance from the intersection of face0 to the edge of the chamfer.

face1

Type: Rhino.Geometry.BrepFace
Second face to chamfer from.

uv1

Type: Rhino.Geometry.Point2d
A parameter face1 at the side you want to keep after chamfering.

radius1

Type: System.Double
The distance from the intersection of face1 to the edge of the chamfer.

trim

Type: System.Boolean
If true, the input faces will be trimmed, if false, the input faces will be split.

extend

Type: System.Boolean
If true, then when one input surface is longer than the other, the chamfer surface is extended to the input surface edges.

tolerance

Type: System.Double
The tolerance. In in doubt, the the document's model absolute tolerance.

outBreps0

Type: Rhino.Geometry.Brep[]
The trim or split results of the Brep owned by face0.

outBreps1

Type: Rhino.Geometry.Brep[]
The trim or split results of the Brep owned by face1.

Type: Brep[]
Array of Breps if successful.

Supported in: 6.0.16224.21491

Brep Class
CreateChamferSurface Overload
Rhino.Geometry Namespace