In addition to downloading and installing the Quad-Views-Foveated program on your PC, you must complete all of the steps below in order to use eye tracking with your Pimax Crystal!

THE INSTRUCTIONS BELOW ARE DIFFERENT FOR STEAMVR AND PIMAXXR - FOLLOW THE INSTRUCTIONS SPECIFIC TO YOUR USAGE

• With PimaxXR
• With SteamVR

In Pimax Client

• Ensure that eye tracking is enabled on your Crystal, and you have performed calibration. These settings can be found in the Pimax Client, under 'Device Settings'. In the 'Device' tab, make sure that 'Eye Tracking' is enabled and use the 'Calibration' button to perform the calibration if needed.

  

If you use PimaxXR...

• Once you installed PimaxXR, open the PimaxXR Control Center (from your desktop or the 'Start Menu') and make sure that PimaxXR is set as your active OpenXR runtime. Also make sure to enable 'Allow use of the eye tracker'.

  

If you use SteamVR OpenXR...

• Follow the instructions to install OpenXR-Eye-Trackers.