Meta Quest Pro - mbucchia/Quad-Views-Foveated GitHub Wiki

In addition to downloading and installing the Quad-Views-Foveated program on your PC, you must complete all of the steps below in order to use eye tracking with your Meta Quest Pro!

THE INSTRUCTIONS BELOW ARE DIFFERENT FOR OCULUS LINK, VIRTUAL DESKTOP and STEAM LINK - FOLLOW THE INSTRUCTIONS SPECIFIC TO YOUR USAGE

If you use Link Cable or Air Link...

On the PC

  • You must use the Oculus OpenXR support. To make sure you are using the Oculus OpenXR runtime, open the Oculus application on your PC, then under 'Settings' -> 'General' click 'Set Oculus as active'. The option may be greyed out/not visible if you are already using the Oculus OpenXR runtime.

    image

  • Meta chose to not expose the eye tracking features of the Quest Pro to end users at this time. As a result:

    • You must create a developer account.
    • Open the Oculus application on your PC, then under 'Settings' -> 'Beta' make sure both 'Developer Runtime Features' and 'Eye tracking over Oculus Link' are toggled on.

    image

On the phone

  • Open the Meta Quest app on your phone, then under 'Headset Settings' -> 'Developer Mode' make sure to 'Developer Mode' is toggled on.

    image

On the headset

  • Ensure that eye tracking is enabled on your Quest Pro, and you have performed calibration. These settings can be found under 'Settings' -> 'Movement tracking'.

    image

If you use Virtual Desktop...

YOU MUST USE VIRTUAL DESKTOP 1.29.0 OR HIGHER

  • If you are NOT using VirtualDesktopXR (VDXR), you must follow the instructions to install OpenXR-Eye-Trackers.

  • Ensure that eye tracking is enabled on your Quest Pro, and you have performed calibration. These settings can be found under 'Settings' -> 'Movement tracking'.

    image

  • Open the Virtual Desktop app and navigate to the 'Streaming' settings. Enable 'Forward face/eye tracking to PC'.

    image

If you use Steam Link

On the headset

  • Ensure that eye tracking is enabled on your Quest Pro, and you have performed calibration. These settings can be found under 'Settings' -> 'Movement tracking'.

    image

On the PC

  • You must follow the instructions to install OpenXR-Eye-Trackers.

  • Open the SteamVR settings, make sure that 'Advanced Settings' is set to 'Show', then under 'Steam Link', turn on 'Enable OSC' and 'Share eye tracking data to other apps on this PC via OSC'. Then under 'OSC Output Port', select '9015 (Custom: VRCFT, ETC.)'.

    image