Tested Hardware - mathiasvr/bluejay GitHub Wiki
DISCLAIMER - ABANDONED REPO
This page has moved to the new repository.
Please add information to the new repository since this one is abandoned.
This is a collection of all hardware that Bluejay was successfully tested on. Please feel free to add your hardware, the version of Bluejay you tested with and the cell count of your batteries.
RTFs
| RTF |
Bluejay Version |
Cells |
Notes |
| Eachine US65 Pro |
v0.14 |
2S |
|
| Eachine AE65 |
v0.14 |
1S |
|
| Eachine Tyro79 |
v0.14 |
3S |
|
| Emax TinyhawkS/2 |
v0.14 |
1S-2S |
|
| Emax Tinyhawk II Freestyle |
v0.14 |
2S |
48kHz + DSHOT300 + 4kHz Gyro + 4kHz PID Loop |
| Emax Tinyhawk III |
v0.16 |
1S |
48/96kHz + DSHOT300. 96 PWM seems smoother when in acro and flying aggressively |
| Emax Nanohawk X |
v0.16 |
1s |
|
| Flywoo Explorer LR4(Analog) |
v0.14 |
4S |
Problems with DSHOT150, DSHOT300 works |
| Flywoo Firefly 1S Nano Baby |
v0.16 |
1S |
O-H-5 ESC, 96 PWM Frequency, min start power had to be increased to get motors spinning, also see Flywoo GOKU Versatile F4 5-IN-1 below |
| HappyModel Mobula6 |
v0.14 |
1s |
|
| HappyModel Mobula6 ELRS |
v0.14 |
1s |
|
| HappyModel Mobula7 ELRS |
v0.16 |
1s |
(Beginner) 96 PWM Frequency; Set Min/Max start power to maximum amounts for all motors to spin |
| NewBeeDrone AcroBee BLV3 |
v0.14 - v0.16 |
1s |
48khz + DSHOT600. |
| iFlight Protek35 |
v0.14 |
4s |
48kHz + DSHOT600 + 8kHz Gyro + 8kHz PID loop |
| iFlight Nazgul5 V2 |
v0.14 |
5s, 6s |
(FPV begginer) only used the default settings. Not much of a difference, only feel smoother to me |
| iFlight Nazgul5 V2 |
v0.16 |
(3s for editting settings on computer, no flight done) 4s, 5s, 6s |
(FPV beginner) 48kHz default settings. Motors don't get hot with a "cinematic"/cruising flight(I was only testing my new antenna combo) |
| iFlight Nazgul V2 |
v0.14 |
6S |
48 kHz, DShot 600, 8kHz PID loop, Customized PID tuning, very spicy filter settings - no issues at all. Works pretty fine, smooth and cold motors |
| Darwin Babyape Pro |
v0.16 |
3S |
48kHz, Bi-directional Dshot600(BF 4.2) Dshot300(BF 4.3) |
AIOs
| AIO |
Bluejay Version |
Cells |
Notes |
| iFlight Succex whoop edition |
v0.14 |
2-3S |
on Earlier versions 48Khz firmware causes yaw twitches |
| JHEMCU GHF420 AIO |
v0.15 |
3S |
Bi-directional Dshot300, 24k tail and main motors, E180 Helicopter running on Rotorflight firmware. Works great |
| JHEMCU GHF411 Pro |
v0.13 |
4S, 6S |
|
| JHEMCU GHF13 AIO |
v0.14 |
3S |
|
| Jhemcu GHF405 F4 25A |
v0.14 |
3S |
|
| CrazybeeX |
v0.14 |
2S |
|
| BETAFPV F411 v1.1 (square) |
v0.16 |
1S |
flashed 0.16 48k, converted bl_s values for 1.25 rampup. worked great |
| BetaFPV AIO 20A V3 |
v0.13 |
2S-4S |
|
| BETAFPV F405 20A V4 |
v0.14 |
2S |
|
| BETAFPV F722 AIO 35A |
v0.14 |
4S |
PAVO 30 |
| LANRC F722HD AIO 45A |
v0.14 |
4S |
|
| GEPRC F4 AIO 12A |
v0.14 |
2S, 4S |
Tested 4S with 48kHz PWM |
| Happymodel DiamondF4 |
v0.14 |
1S |
|
| Happymodel Crazybee X 2.1 |
v0.14 |
2S |
|
| Happymodel Crazybee F4 Pro 2.0 |
v0.16 |
2S |
|
| Happymodel Crazybee F4 Pro 3.0 |
v0.16 |
2S |
|
| Happymodel Crazybee F4 Lite |
v0.16 |
1s |
|
| BetaFPV F4 1S 12A AIO elrs |
v0.14 |
1S |
startup power needs increase to at least 1100 to start 1202.5 motors |
| Flywoo GOKU Versatile F4 5-IN-1 |
v0.14 |
1S |
Don't flash Bluejay, it renders the ESCs useless and the motors only twitch a little. Recovery works via the C2 interface. |
| Flywoo GOKU Versatile F4 5-IN-1 |
v0.16 |
1S |
Didn't see the above warning but flashed 0.16 48k, converted bl_s values for 1.25 rampup. worked great |
| Flywoo GOKU 4-in-1 BS13A |
v0.16 |
4S |
|
| HGLRC Zeus5 AIO |
v0.14 |
1-2S |
Might need startup power increase on 48kHz with 1202.5 motors, but didn't test if that solves the occasional motor-hickups on start. |
ESCs
| ESC |
Bluejay Version |
Cells |
Notes |
| Aikon 30A V3.1 |
v0.14 - 0.16 |
3S |
Tested using DSHOT 600 @ 24 & 48 KHz |
| HIFIONRC 45A |
v0.13 |
3S-6S |
|
| iFlight SucceX-e 45A |
v0.14 |
4s |
pwm 48KHz, flying on a taycan, flywhoo f7 twin_g Betaflight 4.3, no tune flys beautiful. |
| Mamba F30 Mini |
v0.13 |
2S-5S |
|
| Mamba F40 |
v0.14 |
6S |
48kHz causes low throttle oscillations. Can be mitigated in Betaflight with set thrust_linear = 25. On 24kHz + Dshot600 - no issues |
| Mamba F40 |
v0.12 |
4S |
|
| Mamba F40 Mini |
v0.13 |
6S |
|
| Mamba F40 Mini |
v0.16 |
6S |
24kHz, Dshot600, Motor Timing 15° |
| LANRC 55A 4IN1 |
v0.14 |
6S |
|
| Eachine 20A 4in1 ESC |
v0.14 |
4S |
24kHz + Dshot600 - no issues, original ESC for Eachine Tyro79 |
| Racestar RS20Ax4 |
v0.13 |
2S |
working |
| Racestar RS30A |
v0.14 |
4S |
G-L-30 not working. Post-flashing motors do not run at all. Flashing back to blheli_s works |
| Racerstar Rev35 4in1 (anniv. edition) |
v0.16 |
4s |
J-H-15, 24kHz, DShot 300 ok |
| SPEDIX ES30 HV 30A |
v0.14 |
6S |
Single ESC |
| Flightone Bolt V1 |
v0.14 |
4S |
bidir ds600, 48khz. Had to flash blheli_s first - configurator wouldn't pick up ESCs. Desync on 6S, investigating |
| HakRC 10x4A |
v0.14 |
1S |
Running on K110 helicopter on Rotorflight firmware, 48k on 10000KV 1106 main motor, 96k on 19000KV 0806 tail motor |
| HakRC 20A 4in1 |
v0.16 |
4S |
48kHz + Dshot300 |
| HGLRC Zeus 28A 4in1 |
v0.16 |
4S |
F-H-40 bidir DS600 96k Eachine Shadow Fiend T1404 2750 KV motors. So far so good |
| SpeedyBee 35A BLHeli_S Mini 4-in-1 |
v0.16 |
4S |
|
Motors