Lab 5 1 - mathewyanez/tech-journal GitHub Wiki

Sniffers are basically just hardware editions of Wireshark.

When using CTF Modules, the PC is very picky for some reason compared to when it is connected to a switch.

Connecting to a router requires subnet masks, ports to be open, and correct Ethernet cable connections from device to device.

This Router refuses to connect to these PCs without a switch in-between them, although the Subnets are different, and the IP addresses are correct, and the gateways are correct, the connection still will not go through.

IT WAS THE DANG STRAIGHT THROUGH CABLE I SPENT 30 MINUTES TRYING TO FIGURE THIS OUT!!!

Note: For future reference, try different cables.