imx291 and imx307 pinouts - markmac99/ukmon-pitools GitHub Wiki

The image below shows the connector layout for the IMX291.

Ethernet is on the left (6-pin cable), power is on the right (4-pin, only two used). The sockets on the right in the images are not used. Note that the camera PoE cable usually has a thicker two-pin red/black cable which is unused. The one you need is the thin pair going into a 4-way plug, with two of the pins not connected to any wire.

These are the pin connections for the IMX307.

The 307 has a single combined 8-pin plug on the right side of the board in this image. The sockets along the top and bottom are not used.

/images/imx307-headers.jpg

Cable colour coding for the imx307 power/ethernet connector from 1 (top) to 8 (pwr)

  • Not connected (N/C)
  • Purple
  • Blue/White
  • Blue
  • Green/White
  • Green
  • Black
  • Red