NASCOM 1 & NASCOM 2

The code should work with both NASSYS and T MONITORs, and is located by default at $1000.

Classic library support (+nascom)

• Native console output
• Native console input
• ANSI vt100 engine
• Generic console
  • Redefinable font
  • UDG support
  • Paper colour
  • Ink colour
  • Inverse attribute
  • Bold attribute
  • Underline attribute
• Lores graphics
• Hires graphics
• PSG sound
• One bit sound
• Inkey driver
• Hardware joystick
• File I/O
• Interrupts
• RS232

Quick start

zcc +nascom -lm -o adventure -create-app adv_a.c

-or- zcc +nascom -clib=ansi -lm -o adventure -create-app adv_a.c

This command will build a file called "adventure.nas", an HEX formatted binary file suitable to be run on the existing emulators.

It is possible to choose a full VT/ANSI emulation or a tiny console support. The ANSI version of the library depends a bit less on the ROM because the video memory is addressed directly.

You can also change the program location with the "-zorg=" option. The default position is at address $1000.

Virtual Nascom

Download and build from http://repo.or.cz/w/virtual-nascom.git

To run

./virtualnascom adventure.nas

Once the monitor is running, enter "E 1000"

VNASCOM Emulator hint

To run a compiled program:

vnascom ROM=nassys1.nas RAM=adventure.nas KBD=E1000

NASCOM related WEB Links

http://www.nascomhomepage.com

https://web.archive.org/web/20060701084848/http://www.myplace.nu/nascom/