MKS DLC

Features

• CPU is ATMEGA328P-AU, 8bit 20MHZ, 5V logic level, stronger anti-interference type...
• Support Laser and CNC...
• Dupport writing machine...
• Support MKS TFT24/32 connect by AUX-1, and TFT_CNC firmware support Laser mode and CNC mode...
• Support grbl firmware...
• Support update firmware by USB...
• Support upload firmware hex file by Xloader...

Firmware

• Grbl firmware hex file link: https://github.com/gnea/grbl/releases
• Grbl link: https://github.com/grbl/grbl
• Grbl related instructions : https://github.com/gnea/grbl/wiki

How to upload grbl firmware hex file

• Download grbl firmware hex file
• Open Xloader and set it, like this
• Upload firmware ok

HOW to build grbl firmware and online upload it

• Download grbl firmware
• Build and upload it by Arduino

How to buy the MKS DLC

https://www.aliexpress.com/item/32924263672.html?spm=2114.12010612.8148356.1.67302c46xDuwHo