Product introduction

Makerbase 32 bit Cloned duet 2 wifi V1.04 board with 4.3 or 7.0 Pandue touch screen for 3d printer parts CNC ender 3 pro

Features

• MKS duet2 wifi hardware from Duet3D
• CPU is ATMEL ATSAM4E8E, ARM-Cortex-M4, 120MHZ
• Support 5 AXIS TMC2660(use SPI mode) and max current is 4A
• Support esp8266 wifi and transfer gcode file for printing
• The parameter config by Web page
• Update firmware by TF card
• Support DC12-24V input
• ...

Duet2v1.04 board display

PanelDue board display

Duet2v1.04 dimensions

PanelDue dimensions

4.3inch dimensions

7.0inch dimensions

Board wiring diagram

Firmware

• Duet2wifi use RepRapFirmware. click here
• PanleDue use PanelDueFirmware. click here
• If you use Duet2wifi with PanleDue and 4.3inch screen, you need upload PanleDue-Vx-4.3.bin firmware.
• If you use Duet2wifi with PanleDue and 7.0inch screen, you can upload PanleDue-Vx-5.0.bin or PanleDue-Vx-7.0.bin firmware, because 5.0 and 7.0 inch screen's resolution is 800x480 panels.

Note

• Board power support DC12-24V input,please make sure that the positive and negative poles of the power supply are correct before powering on. otherwise, the motherboard may be damaged easily.
• Thank you for using MKS products. If you have any questions during use, please contact us in time and we will work with you to solve it.
• For more product dynamic information and tutorial materials, you can always follow MKS's Facebook and GitHub and YouTube. Thank you!