Develop a read-only file system driver which allows the contents of each PI 1.2 FFS in the system to appear as a UEFI file system.

• Difficulty: Medium
• Language: C
• Mentor:
• Suggested by:

Table of Contents Current Status Details Development environment Further Discussion See Also

• Being worked on by Colin Drake for GSOC2011
  • Source: https://github.com/cfdrake/FileSystemPkg

The PI 1.2 Firmware File System (FFS) allows firmware elements to be packed efficiently into flash memory.

The FirmwareVolume2 protocol allows firmware code to easily access the contents of each FFS. This protocol is defined within FirmwareVolume2.h.

Filesystems (generally disk based) in UEFI can be accessed through the SimpleFileSystem protocol. This protocol is the defined within SimpleFileSystem.h.

This project would involve reading each FirmwareVolume2 protocol instance and from it producing a SimpleFileSystem instance. Each FFS file appear as a readable file.

Each FFS file which contains a PE/COFF section should have a .efi file available in the system. An example uses of this would be to allow UEFI applications stored in the FFS to be run from the UEFI shell.

Building: This project can be completed on any edk2 supported OS or toolchain.

Testing: This project can be tested on any PI 1.2 system. Even without loading the driver into flash, it can be loaded by using the EFI shell 'load' command. OVMF, Nt32Pkg or UnixPkg could each provide friendly test environments.

This project would be for an edk2 based driver, so please discuss the project on edk2-devel.

• Tasks
• GSOC2011#Read-only FFS file-system driver