Main menu bar

MenuBar_Logisim.png

1. Poke tool : allows to modify values in the circuit (mainly for simulation mode)
2. Select : allows to select and modify an element, and to draw wires/buses
3. Text : allows to write text
4. Input PIN
5. Output PIN
6. NOT gate
7. AND gate
8. OR gate
9. Show circuits and libraries in the project tab
10. Show the simulation hierarchy of the project in the project tab
11. Modify the content of the current circuit
12. Modify the symbol of the current circuit

Toolbar in mode "Circuit and libraries" (9.)

MenuBar_Logisim2.png

a. Add a circuit b. Move a circuit higher c. Move a circuit lower d. Remove a circuit

Toolbar in mode "Simulation hierarchy" (10.)

MenuBar_Logisim3.png

a. Activate/deactivate simulation (signal propagation) b. ??? c. Activate/deactivate continuous ticks (at the frequency specified in Simulate->Tick Frequency) d. Move simulation one tick forward e. Move simulation one period forward or half a period of the 'mainclk' clock (selection of the step in the Project->Options menu, Simulation tab, "Duration of main tick (F2)")