<wiki:video url="http://www.youtube.com/watch?v=GpERJflmJKQ"/>

For installation of the binding, please see Wiki page [# !EnOcean Binding Configuration

The following config params are used for the !EnOcean binding.

• enocean:serialPort The serial port (can be a virtual one) where the enocean transceiver is connected to. An USB adapter creates a virtual serial port (normally /dev/ttyUSB0 under linux)

f28f499f39ef60839adca05929150952

General format: enocean="{id=<id_of_enocean_device> [, eep = <EEP_name>][, channel = ][, parameter = ]}" The device id is printed on the device package. When the EEP is needed, the eep (e.g. "F6.02.01") is also printed on the device package. All parameters in [] are optional and only used for some devices.

These EEP Profiles are already supported. If your device is not listed, please add an issue for it at openhab.

• Rocker Switches
• F6:02:01 (Light and Blind Control - Application Style 1)
• Environment Sensors
• A5:02:05 (Temperature Range from 0° to 40°)

Soon supported:

• Contact Sensors
• D5:00:01 (Single Input Contact)

• eep = F6:02:01, F6:02:02
• channel = A / B
• parameter =
• I: The I button (normally the one with the solid arrow sign) was pressed (Switch, pressed=Update to ON, released=Update to OFF)
• O: The O button (normally the one with the empty arrow sign) was pressed (Switch, pressed=Update to ON, released=Update to OFF)

Be aware that the parameters are still under discussion and can be subject to change.

Standard usage: Switch Button_Up () {enocean="{id=00:00:00:00, eep=F6:02:01, channel=B, parameter=I}}

• pressed: ON
• released: OFF

To control a roller shutter: 0067df86ebf36144276dda80762257fe

• Short press down: Close roller shutter or stop it when it was started shortly ago
• Short press up: Open roller shutter or stop it when it was started shortly ago
• Long press down: Close roller shutter as long as the button is pressed
• Long press up: Open roller shutter as long as the button is pressed

See https://code.google.com/p/openhab-samples/wiki/ItemDef#How_to_control_a_homematic_roller_shutter_with_an_Rocker Example of roller shutter controlling

To control a dimmer (left buttons = channel A): Dimmer myLights () {enocean="{id=00:00:00:00, channel=A, eep=F6:02:01}"}

• Short press down: Switch light ON
• Short press up: Switch light OFF
• Long press down: Dim light UP as long as the button is pressed (INCREASE every 300ms)
• Long press up: Dim light DOWN as long as the button is pressed (DECREASE every 300ms)

• eep = A5:02:05
• channel = none
• parameter =
• TEMPERATURE: The current temperature (Number, unit=°C)

Number UG_Flur_Temp "Temperature [%.1f °C]" <temperature> () {enocean="{id=00:00:00:00, eep=A5:02:05, parameter=TEMPERATURE}"}

• eep = D5:00:01
• channel = none
• parameter =
• CONTACT_STATE: Contact Open / Closed (OpenClosedType)

Will work in 1.4.0

tbd