Getting Started Writing Simple Application - lersek/edk2 GitHub Wiki

How to Write a Simple EDK II UEFI Application

Table of Contents 1) Create a Work Space Directory 2) Download the Edk II source and build tools 3) Run the edksetup 4) Edit the file conf/target.txt 5) Create a project 6) Build your UEFI Application Build X64 UEFI Application Build IA32 UEFI Application

e.g. mkdir edk2

1. Latest EDK II source from following Instructions on Step by step instructions
   1. i.e. example >git clone https://github.com/tianocore/edk2.git

OR

1. Download the latest .zip UDK2017 Download release (or Latest UDK release).

Run edksetup --nt32 script from the command line prompt at the Work Space directory

1. Windows Comand Prompt: C:\edk2> edksetup --nt32
2. Linux like: bash$ . edksetup.sh BaseTools

Modify TARGET_ARCH and TOOL_CHAIN_TAG as required.

1. TOOL_CHAIN_TAG see:
   1. Windows Windows systems ToolChain Matrix
   2. Newer versions of LinuxUsing EDK II with Native GCC
   3. Older Linux distributions Unix-like systems
   4. Mac OS X Xcode
2. TARGET_ARCH - Optional can also use "-a" on the BUILD command line
   1. Both IA32 and X64 : TARGET_ARCH = IA32 X64
   2. Just X64 : TARGET_ARCH = X64
   3. On the commnad line overriding the target.txt: BUILD -a X64

1. Create a new directory. Can be a directory anywhere within the Work Space Directory (e.g. C:\edk2\MyHelloWorld or ~/src/edk2/MyHelloWorld)
2. Create a .c file in the project directory (see example: MyHelloWorld.c)
3. Create a .inf file in the project directory (see examle: MyHelloWorld.inf)

1. Update an existing platform .DSC file with your project .inf file. The following list some examples.
   1. Edit the DuetPkg/DuetPkgX64.dsc and add your new application to the the [Components] section and before the [BuildOptions] section. (e.g. MyHelloWorld/MyHelloWorld.inf )
2. Invoke the Build
   1. At the command prompt > Build -a X64 -p DuetPkg/DuetPkgX64.dsc
3. Final Output .efi file will be in the directory WorkSpace/Build/DuetPkg/DEBUG_$(TOOL_CHAIN_TAG)/X64

1. Since this is the default as per the target.txt Update the Nt32Pkg/Nt32Pkg.dsc file.
   1. Edit the Nt32Pkg/Nt32Pkg.dsc and add your new application to the the [Components] section and before the [BuildOptions] section. (e.g. MyHelloWorld/MyHelloWorld.inf )
2. Invoke the Build
   1. At the command prompt > Build
3. Final Output .efi file will be in the directory WorkSpace/Build/NT32/DEBUG_$(TOOL_CHAIN_TAG)/IA32
4. Test with Windows NT 32 emulation: command prompt > Build Run

Getting Started