Hardware used - kinematicdigit/Jabberwocky GitHub Wiki
We’ve worked closely with LDO Motors, who have supplied us with premium-quality hardware to bring Jabberwocky to life. Below is the complete list of hardware used in this build:
| Hardware / Component | Quantity |
|---|---|
| M3 Heat-set Insert | 12 |
| M2x2 Wafferhead | 2 |
| M2x10 SHCS | 8 |
| M2x16 BHCS | 1 |
| M2.5x8 SHCS | 2 |
| M3x8 BHCS | 24 |
| M3x10 BHCS | 2 |
| M3x12 BHCS | 1 |
| M3x40 BHCS | 1 |
| M3x6 FHCS | 1 |
| M3x12 FHCS | 1 |
| M3x16 SHCS | 6 |
| M3x20 SHCS | 1 |
| M3x35 SHCS | 3 |
| M3x45 SHCS | 1 |
| M4x16mm Steel Dowel Pin | 1 |
| M4x18mm Steel Dowel Pin | 2 |
| M3 Nut | 1 |
| LDO 1515 Slide in T Nuts | 10 |
| Bowden Collet | 1 |
| 6x3 Magnets (N52) | 2 |
| #4 Full Length Cutting Blade | 5 |
| Standard BMG Thumbscrew, spring and nylon washer | 1 |
| High temp PTFE Tube | 30mm |
| F682X-ZZ Bearing | 2 |
| MR84-ZZ Bearing | 2 |
| MR63-ZZ Bearings | 2 |
| LDO PEEK Sleeve Bearings | 2 |
| Orbiter Non-Threaded Gear | 2 |
| Bondtech Integrated 44/17 Drive Gear | 1 |