Flashing: Linux - kad/Marlin GitHub Wiki

  • Install avrdude in your Linux distribution.
    • Debian/Ubuntu/Raspbian: 
      apt install avrdude
    • Fedora/CentOS: 
      dnf install avrdude
      or 
      yum install avrdude
    • OpenSUSE: 
      zypper in avrdude
  • Using avrdude: 
    avrdude -v -p atmega1284p -c arduino -b 115200 -D -P /dev/ttyUSBx -U flash:w:Anycubic-Mega-Zero-firmware.hex:i
    Notes:
    • Replace /dev/ttyUSBx with your actual name of USB-Serial port where printer is attached
    • Replace Anycubic-Mega-Zero-firmware.hex if you have different firmware filename