BPNVG Documentation

• BPNVG V2 by Stubbs (pano)
  • Video Demo and Guide
  • Pano BPNVG Assembly
• BPNVG V2 by Stubbs (bino)
  • Bino BPNVG Assembly
• 3D Printed Parts Kit Assembly

BPNVG V2 by Stubbs (pano)

The original BPNVG-project by Stubbs was inteded to be build as a panoramic version but adaptations like binoculars have been made too.

---

Panos:

Binos: // to be added

Video Demo and Guide

---

Pano BPNVG Assembly

You need the following components for one "unit". Repeat this once for a full pair:

• 1 Powered Bridge
• 2 Sensor Mounts
• 2 Lens Covers
• 2 Camera Spacers
• 2 Adapter mounts if running something different than a Runcam Night Eagle 2
• 2 of your selected sensors
  • Runcam Night Eagle 2 Pro
  • Foxeer Night Cat 3(Requires adapter)
  • Runcam Night Eagle 3(Requires adapter)
• 2 Displays
• 2 internal board mounts
• 2 display mounts
• 1 binary housing
• 2 bi-convex lenses dia = 38 mm, f = 50 mm
• 1 1/4-20 Bolt
• 1 1/4-20 Nut
• 13 thread inserts M4 recommended
• 12 ISO 7380 M4x10

Powered Bridge parts (one per pair):

• 1 "Rectangle"
• 1 Power Button
• 1 Switchcraft female DC jack
• 1 Wilcox dovetail shoe
• 1 Power cable equipped with a Switchcraft male DC jack
• 1 Countersunk M4 screw

All printed components can be printed according to own requirements

BPNVG V2 by Stubbs (bino)

You need the following components for one "unit". Repeat this once for a full pair:

• 1 Powered Bridge
• 1 Sensor Mounts
• 1 Lens Covers
• 1 Camera Spacers
• 1 Adapter mounts if running something different than a Runcam Night Eagle 2
• 1 of your selected sensors
  • Runcam Night Eagle 2 Pro
  • Foxeer Night Cat 3(Requires adapter)
  • Runcam Night Eagle 3(Requires adapter)
• 1 Displays
• 1 internal board mounts
• 1 display mounts
• 1 Mono housing
• 1 bi-convex lenses dia = 38 mm, f = 50 mm
• 1 1/4-20 Bolt
• 1 1/4-20 Nut
• 7 thread inserts M4 recommended
• 6 ISO 7380 M4x10

Powered Bridge parts (one per pair):

• 1 "Rectangle"
• 1 Power Button
• 1 Switchcraft female DC jack
• 1 Wilcox dovetail shoe
• 1 Power cable equipped with a Switchcraft male DC jack
• 1 Countersunk M4 screw

3D Printed Parts Kit Assembly

This section of the documentation is intended for users who have purchased a parts kit from the justcallmekoko Tindie store.

Your kit should come with:

• 2 Sensor mounts
• 2 Sensor adapters
• 2 Main NVG housings
• 2 Screen mounts
• 2 Board mounts
• 2 Lens rings
• 2 Spacers
• 1 Bridge
• 12 Threaded brass inserts
• 4 M4x4 Screws
• 8 M4x8 Screws
• 2 1/4-20 Nuts
• 2 1/4-20 Bolts

Assembly

.