Panasonic TV Binding - juri8/openhab GitHub Wiki
Documentation for the Panasonic TV binding
This binding supports Panasonic TVs. It should be compatible with most up-to-date Panasonic Smart-TVs.
# panasonictv:<instance> = <ip>
# IP address of a Panasonic TV, for example
panasonictv:bedroom_tv = 192.168.1.171
All items use the following format described below. Currently, only switch-items are allowed that work as toggles. The state of the switches thus do not correspond to the current state of the TV (e.g. power, input, mute etc.).
{panasonictv="<instance>:<command>"}
The in the items declaration has to be defined in openhab.cfg first.
The commands correspond to the commands on your remote control. The following commands are available:
| Command | Description |
|---|---|
| CH_DOWN | Channel down |
| CH_UP | Channel up |
| VOLUP | Volume up |
| VOLDOWN | Volume down |
| MUTE | Mute |
| TV | TV |
| CHG_INPUT | AV |
| RED | Red |
| GREEN | Green |
| YELLOW | Yellow |
| BLUE | Blue |
| VTOOLS | VIERA tools |
| CANCEL | Cancel / Exit |
| SUBMENU | Option |
| RETURN | Return |
| ENTER | Control Center click / enter |
| RIGHT | Control RIGHT |
| LEFT | Control LEFT |
| UP | Control UP |
| DOWN | Control DOWN |
| 3D | 3D button |
| SD_CARD | SD-card |
| DISP_MODE | Display mode / Aspect ratio |
| MENU | Menu |
| INTERNET | VIERA connect |
| VIERA_LINK | VIERA link |
| EPG | Guide / EPG |
| TEXT | Text / TTV |
| STTL | STTL / Subtitles |
| INFO | Info |
| INDEX | TTV index |
| HOLD | TTV hold / image freeze |
| R_TUNE | Last view |
| POWER | Power off |
| REW | Rewind |
| PLAY | Play |
| FF | Fast forward |
| SKIP_PREV | Skip previous |
| PAUSE | Pause |
| SKIP_NEXT | Skip next |
| STOP | Stop |
| REC | Record |
| D1 | Digit 1 |
| D2 | Digit 2 |
| D3 | Digit 3 |
| D4 | Digit 4 |
| D5 | Digit 5 |
| D6 | Digit 6 |
| D7 | Digit 7 |
| D8 | Digit 8 |
| D9 | Digit 9 |
| D0 | Digit 0 |
| P_NR | P-NR (Noise reduction) |
| R_TUNE | Seems to do the same as INFO |
| HDMI1 | Switch to HDMI input 1 |
| HDMI2 | Switch to HDMI input 2 |
| HDMI3 | Switch to HDMI input 3 |
| HDMI4 | Switch to HDMI input 4 |
openhab.cfg
panasonictv:bedroom_tv = 192.168.1.171
Items
Switch BedroomTVPower "Power" {panasonictv="bedroom_tv:POWER"}
Switch BedroomVolumeUp "Volume Up" {panasonictv="bedroom_tv:VOLUP"}
Switch BedroomVolumeDown "Volume Down" {panasonictv="bedroom_tv:VOLDOWN"}
Switch BedroomTVInput "TV input" {panasonictv="bedroom_tv:TV"}